Show all posts by user
Halo Temans,
Saya sudah punya 2 printer: 1) Portabee dan 2) Prusa i2 yang saya print dengan printer pertama. Sekarang sedang membuat 2 printer lagi PrismMendel 1.5 (dengan frame alumunium) dan Prusa i2 juga. Saya akan lepas printer pertama Portabee seharga 5.9 juta saja. Jika ada yang minat serius silakan hub saya. Bisa lewat chatting ym: zungmann atau email: zungma&
by
zungmann
-
Indonesia RepRap User Group
Saya jual partnya 900ribu. Ini non standard dari Prusa i2 karena saya mix component yg saya paling bagus berdasarkan pengalaman bikin, jadinya bikin konfigurasi sendiri. Kira2 partnya terdiri dari
- Standard vertex + vertex foot
- BarClamp yg lebih tebal
- X parts pake Jonas Kuehling
- X-Carriagenya pake yg fan-mount
- Extruder pake Greg's Accessible
Arduino pake Arduino Mega kalo RAMPS.
Steppe
by
zungmann
-
Indonesia RepRap User Group
Di Configuration.h Marlin ada baris ini, mungkin bisa dicoba?
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
#define X_ENABLE_ON 0
#define Y_ENABLE_ON 0
#define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 // For all extruders
by
zungmann
-
Indonesia RepRap User Group
Bung Abdillah, saya tinggal di Bogor, Indonesia
Kalo mau chat boleh kita diskusi di ym: zungmann.
Saya pake 1284P, IC-nya import sih, udah ngubek di Glodok ga dapet. Programmernya pake Arduino. Printer Prusa yg baru pake Gen7, yang pertama pake RAMPS. Saya sedang nyetak part Prusa lagi: pake PLA putih, 0.25mm per layer dan 40% infill biar kuat.
by
zungmann
-
Indonesia RepRap User Group
Iyah, sudah berhasil mencetak dengan Gen7 + Marlin di Prusa Mendel. Prusa Mendel ini saya buat dengan printer pertama Portabee, pake RAMPS + Marlin. Sekarang sedang mencetak parts Prusa lagi (attached).
Saya attach Configuration.h Marlin sebagai referensi, barangkali mau mencoba Marlin juga.
Wah kalo stepper driver ga sanggup deh bikin sendiri.
by
zungmann
-
Indonesia RepRap User Group
Saya nyolder sendiri board Gen7 dan berhasil dengan baik. Yang merepotkan merakit sendiri adalah ketika part plastik yg digunakan pecah, apalagi untuk bar-clamp Prusa Mendel yang tipis. Akhirnya saya ganti dengan yang tebal.
by
zungmann
-
Indonesia RepRap User Group
Update:
Pembuatan Prusa Mendel i2 akhirnya selesai juga. Print pertama adalah vas bunya dengan PLA putih seperti diattach. Masih ada miss-alignment di sumbu X dan Y. Setelah melakukan beberapa perubahan dan tuning, termasuk mengganti X-Carriage dan tambah frame-stabilizer yg dicetak sendiri akhirnya hari ini saya puas dengan hasil printnya: berhasil print frame-vertex Prusa dengan sangat mulus: 0
by
zungmann
-
Indonesia RepRap User Group
Overshoot happens for higher temp like 200C. I believe it's something to do with the PID factors. I have no luck yet tuning it. Tried Marlin in it works perfectly, very fast reaching the target temp. Can I just use the PID factors from Marlin directly or need some scaling?
by
zungmann
-
Next Wave Electronics Working Group
I am running Marlin on Gen7 1.4.1. Its fast heating the extruder and the bed, faster then my RAMPS. So far so good, but it just few small prints yet
by
zungmann
-
Next Wave Electronics Working Group
Halo All,
I am now testing my J-Head MK V (bought from hotends.com) on Gen7 1.4.1 + Teacup and puzzled with this issue:
Suppose I heat the hotend to, for example, 80 deg, I notice the extruder led lights up until it read around 80 deg and turn off, but the hotend temp is not stay constant around 80 instead it keeps going up until 88 or event 90+ the slowly drops until around 79, then the lights
by
zungmann
-
Next Wave Electronics Working Group
I can also burn the bootloader via the Arduino GUI: Tools -> Burn Bootloader. Now its easier to upload the firmware, no need the programmer.
by
zungmann
-
Next Wave Electronics Working Group
Hi all,
I want to share my experience in uploading the Teacup firmware into Gen7 1.4.1. Somehow I could not burn the boot loader. Then try directly to burn the firmware using Arduino-as-ISP.
Many tries just gave me mismatch error or programmer timeout. I tried both using Arduino GUI and command line.
After several hours trying, I finally managed to upload the firmware. This time that make diff
by
zungmann
-
Next Wave Electronics Working Group
Update:
Saya akhirnya print Greg's Accessible Hinge Extruder. Hasilnya seperti terlihat di attachment. Motornya masih belum nyampe juga. Untuk Hotend, saya pesan J-Head MK VB dari hotends.com, masih menunggu paketnya datang...
by
zungmann
-
Indonesia RepRap User Group
Oh ya saya attach gambar Prusa Mendel yang sedang dirakit. Perakitan ini lebih lama dari yang direncanakan karena bar-clamp yang sudah terpasang pecah pas saya kencengin baut2nya dan akhirnya diganti dengan bar-clamp model lain yang lebih kuat. Begitu juga z-motor-mount standard yang aga melengkung jika dikencangkan bautnya.
Selain itu model bushing / bearing-holder juga saya modifikasi karena le
by
zungmann
-
Indonesia RepRap User Group
@Taufiq: untuk Melzi mau solder sendiri? Buat saya lebih mudah DIY Gen7.
@Reno: Prusa Mendelnya belum jadi 100%, masih asembly hardwarenya karena saya rakit sambil jalan print partnya dan beberap part standard saya ganti seperti:
- Bar Clamp, yg standard mudah sekali patah,
- Z Motor Mount, saya ganti dgn yg Integrared, tanpa pake Rod Clamp yg dibaut
- X End Motor & Idlernya saya ganti denga
by
zungmann
-
Indonesia RepRap User Group
Wah keren. Ini model 3dnya bikin sendiri atau downloadable?
Saya udah download model quadcoper di thingiverse
by
zungmann
-
Indonesia RepRap User Group
Mas Taufiq,
Apakah yg di-load di pronterface file stl atau file gcode?
Jika stl maka promterface akan melakukan slicing dulu dengan memanggil program slicer. Saya ga pernah pake cara seperti itu tapi stl saya slice terpisah di slic3r dan kemudian sy load di pronterface. Kadang sy perlu menambahkan atau edit command gcodenya.
by
zungmann
-
Indonesia RepRap User Group
Sip, makin banyak yang bikin printernya.
RepRapPro itu brandnya Suhu RepRap Dr Adrian Bowyer.
Untuk controller saya rasa banyak pilihan:
- RAMPS, pada dasarnya ini shield untuk Arduino Mega. RAMPS support dual extruder yg saya rasa cocok untuk RepRapPro.
- Gen7, ini DIY, bisa kita solder sendiri karena komponennya thru hole, bukan SMD seperti industry-based
- Melzi
- Sanguino
Saya sendiri mengg
by
zungmann
-
Indonesia RepRap User Group
Itu betul ya harganya Rp 14.250/rol? Aga bingung saya dgn harganya, di atas banget Rp 1.160.000 untuk 4 rol.
by
zungmann
-
Indonesia RepRap User Group
Wah seru juga ya di Bandung, 2 taun lalu sih masih tinggal disana, skrg dah lama ga ke Bandung.
Ini sy lg buat Prusa Mendel, framenya udah jadi sih. Dan kalo ada yg mau bikin, bisa saya bantu, atau punya sy dijual saja, haha
by
zungmann
-
Indonesia RepRap User Group
What is your error message anyway?
Maybe we have the same issue, I get this:
"The model has overlapping or self-intersecting facets. I tried to repair it, however you might want to check the results of repair the input file and retry."
I then go ahead print it and found the holes (4 of it) were not perfectly round, but the upper part just made flat. So its like just 75% round holes. I tried an
by
zungmann
-
Slic3r
William1 Wrote:
-------------------------------------------------------
> Whats the resolution it can print at? Or in other
> words, how fine of detail can it print?
Theoretically, using GT2 pulley with 1/16 steps, it is 0.0125 for X and Y. Z, with 1/8 steps only it give 1/1600.
by
zungmann
-
General
Halo All,
Want to share my Portabee. Its quite stable, I think because the 3 motors under the base which are heavy enough to hold the printer steady. Except if the extruder (on X axis accelerate very fast, it shakes). So far I am good at printing at 20 mm/s. I tried with 30 mm/s but have issue with extrusion. I believe its because my extruder drive using a brass insert which I made myself from a
by
zungmann
-
General
Engga kok, sepertinya betul segitu pajaknya. Untuk under-declared .
JIka mau tau bea masuk + pajak:
by
zungmann
-
Indonesia RepRap User Group
Thanks. Richrap blog does help a lot. I have calibrated my extruder. The issue is when extruding (into), but when reverse extruding (retract). When I do first reverse extruding and then extruding, I get it correct on both ways. But when I extrude first I get it less, though reverse extruding still OK. This is done at 200 C.
by
zungmann
-
Reprappers
Halo,
Ada update temans? Saya sudah print beberapa benda: yoda, turtle key chain dan part printer.
by
zungmann
-
Indonesia RepRap User Group