edn: I will do what you want as soon as I got back in town tomorrow at lunch time more or less.... wil post results inmediately. Greetingsby ludara - General Mendel Topics
edn: Sorry for the delayed response, but I want you to know that when I used the G29 with ACCURATE_BED_LEVELING, nothing in my printer moves, not the carriage, the bed, the servo..... but I got the following data in return: SENDING:G29 xGridSpacing: 200.000000 yGridSpacing: -195.000000 Bed Height: > 0.000000 0.000000 0.000000 < 0.000000 0.000000 0.000000 > -0.000000 0.000000 0.by ludara - General Mendel Topics
TobinatorCO Here are my settings: #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false// for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false //by ludara - General Mendel Topics
Broncosis: Thank you for the advice, I had the z axis endstop as normally open, changed it to normally closed but z axis still gets reversed after G29. Will continue reporting....by ludara - General Mendel Topics
edn: Thank you very much for your time and knowledge! I did what you instructed me to do and after a G29 here you have what Pronterface returned: SENDING:G29 Bed G29.1: X:45.0000000 Y:10.0000000 Z:1.7938970 Bed G29.2: X:45.0000000 Y:400.0000000 Z:3.0104327 Bed G29.3: X:445.0000000 Y:400.0000000 Z:2.5990529 Bed level matrix: 0.9999996 0.0000000 -0.0010284 0.0000000 0.9999951 0.0031193 -0.001by ludara - General Mendel Topics
Hi again, New arduino, new ramps, new switch, the problem still exists. What can I do now??? Thanksby ludara - General Mendel Topics
Thank you guys: Edn: I appreciate your advice. I already kne that avoiding a G29 the printer is functional, but then for sure you dont have the benefits of the auto compensation. Will try to find the problem and will report later.... Wvantoorn: I will tray to change the switch as you recommend, the one I am using now responds correclty to M119 in all tryings, but for the sake of peace of mind,by ludara - General Mendel Topics
Hi again, folks: Today I reconnect my endstop switch completely, making sure that there were no problems with the wiring or false contacts and my problem persists, after a G29, my Z axis is still being reversed so I cant send a piece to the printer because my bed will try to go up instead of down..... I am very confused, can you please help me further?? Thanks in advance!!by ludara - General Mendel Topics
Thank you very much regpye!! Today I made some tests with M119. My endstops are never triggered when they should not be. Not after a G28 nor G29, but still my Z axis gets reversed after a G29. Tomorrow I will triple check my Z endstop connections and will test again. I will let you know the results. Thanks againby ludara - General Mendel Topics
Hello all, When I use the G28 command, all goes as expected, the X, Y and Z axes are zeroed (Z using the servo moved switch, in the center of the bed) and my axis work as they should, then I send a G29 and the probe is made in my 3 specified points, but my Z axis gets reversed and the bed tries to go up instead of down. I have tried with Marlin from ErickZalm and AlexBorro, both downloaded todaby ludara - General Mendel Topics
Thank you! Several months ago, I changed the electronics to RAMPS, and I printed more or less well (learning a lot in the process) since I sell the Mondo some weeks ago to someone that wanted a working printer rather than build one himself, I did some modifications to the original design and parts so, I gave him a better printer than a plain Mondo. Right now, I am building (finishing) my own deby ludara - General
Hi all, newbie here! I purchased a reprap mondo kit that comes with what I believe is a techzone monotronics. I finished building the machine and have "calibrated" the current of the motors by touching it. I have also been able to use the arduino/sanguino software to connect to the monotronics and upload a firmware to it, but I am not able to make repsnapper, replicatorG nor reprap host to "see"by ludara - General