Show all posts by user
Prusa i2, Prusa i1, Prism, Sells, and other Mendel variants
Re: Isn't welding already FDM metal printing without the messy powder? - 11 years ago
Hello, I don't think printing as per mig welding is feasable really as distortion due to the temperatures involved would run out of control during cooling. trustytrevby trustytrev - General
Re: - 11 years ago
Hello, Heat + Nylock nuts is not likely to be a good combination. trustytrev.by trustytrev - General Mendel Topics
Re: Reprappro Mendel Mono - 11 years ago
Hello, If you go to this Reprap wiki it will give you an idea of the variations. trustytrev.by trustytrev - General Mendel Topics
Re: 3mm filament with Reprappro's Mendel - 12 years ago
Hello, I think you would find it easier to use a hotend/3mm nozzle from reprappro as there are subtle differences between machines supplied by various companies.One of theirs should fit onto the carriage alongside your other head. trustytrev.by trustytrev - General Mendel Topics
Re: reprappro mendel help please - 12 years ago
Hello, Unless you turn off the power supply to your pc the usb port remains initiated.If you turn the power off then the pc can free and realocate the usb ports. trustytrev.by trustytrev - General Mendel Topics
Re: Is Anyone doing research into dual head RepRap?
- 12 years ago
Hello, Some might find this of interestMendel trustytrevby trustytrev - General
Re: nextdayreprap.co.uk - 12 years ago
Hello, I looked into reprap printers last year.There is quite a lot of conflicting and obsolete information out there.The hardest part is finding stuff that is current and up to date.After some time I chose to purchase a RepRaPro mendel,for the following reasons.Its open source,it is compatable with Linux,it is under constant development,it is operated by the originator of the idea,and itby trustytrev - General Mendel Topics