OK thanks for the info on the levelling. As for the carbon fibre, I'm not sure how you would even print on a "rough" surface, it leaves a very very slight texture (which for me is a preference) given that the finish of most reprap parts differs dependant on the surface being bottom, top or side I don't think it really matters. All I know is I don't have to use any tapes, glues or sprays, firstby markab - Ormerod
Hello, I prefer to use carbon fibre rather than glass for my build plate because PLA adheres better and releases more easily. I notice that the auto levelling requires foil to be placed under a glass build plate so that the IR sensor can range from it. Is this the only possible configuration? I would like to try using the IR sensor levelling but with a carbon fibre plate so what options do I hby markab - Ormerod
So I seem to have the bed levelling set up and working roughly some things I note or have issues with. The corner that is not probed (back right) sometimes is still 0.1 to 0.3mm out after G29, but not always, other corners and centre are usually OK but I find that after a G29 they are not all exactly the same level (some very slight variations) and then on other occasions they seem very very cloby markab - General Mendel Topics
Hello, I am also having problems with this display and a new rumba board, the display lights up but it shows no graphics. If you are using the latest release of Marlin it seems like a commit from somewhere over the last few weeks broke the support for this display, try running from a marlin commit from a few weeks ago to see if it works. I am still trying to work out if there is a bug raised fby markab - General
Now with the correct gcode file mb_fixed.gcodeby markab - Slic3r
I have a particular object that I can not get to slice/print correctly with slic3r. The object is essentially a rectangular box which suspends letters within the box, if you pick the object up you can see right through the cut out letters the letters are held in place with 3 very small bridges between the letter parts and the main box, the bridges are made from layer 1 up to 50% the height of thby markab - Slic3r
Was my bad, I did have an older version, no idea how i managed to get them mixed up. Sorry about that.by markab - Repetier
lol, well you are as baffled as me then, I don't really want to do anything with mono!! I downloaded the latest mac version from When I run the repetier I get a dialogue telling me I need Mono version 2.6 or greater and it has a download button that takes me to the site and as long as I don't install the very latest stable version the repetier software works. If I uninstall mono with the shelby markab - Repetier
So the latest stable version of mono seemed to be the problem, I stepped back one version and it works now.by markab - Repetier
Ok, I ran the mono uninstall script and then tried to start repetier, this time it doesn't exit but I get the you must install mono 2.6 or later message again, I will try an older version rather than the current stable version I already tried.by markab - Repetier
I installed the mac version on my macbook, when it launched it asked me to install mono something so I installed the mac version of that, now the app exits on launch.by markab - Repetier
Just installed Repetier Host for the first time on my macbook, first time I launched it I was asked to go and download a dependancy framwork, I did this and now when I try to open the application nothing happens. If I look in the console log it just says Repetier Host exited. I have renmoved the app and installed again but no change. Any ideas?by markab - Repetier