Hi, I checked the connections and they are good. After lots of configtests I have a working solution, but I think it's a little bit buggy. When I set the X and Y Offset, the shown X and Y coordinates at the LCD after the probing (G29) are not correct. So I can't drive to the home coordinates without the G28 command. At the moment I set the X and Y Offset to 0 and the probing positions are: //by Tarzipan - General Mendel Topics
Its already not commented. My Configs: //============================= Bed Auto Leveling =========================== #define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line) #ifdef ENABLE_AUTO_BED_LEVELING // these are the positions on the bed to do the probing #define LEFT_PROBE_BED_POSITION 30 #define RIGHT_PROBE_BED_POSITION 130 #defineby Tarzipan - General Mendel Topics
Yes The z endstop is triggered, but After The third probe they Lift up The z Probe and stopped all movings. So The probing is Not completed. Im using your Firmware from github with The settings from The makerfarm Firmware. Maybe i made an mistake by configure The nozzle Offset but when i send G92 The Display wont Set The coordinates to 0x 0y 0z, or ist this command Not there for Setting The coorby Tarzipan - General Mendel Topics
Hi, i have a Makerfarm Prusa i3 8" and im adding the Auto Leveling Feature to it. Now i have a problem that i dont get fixed. Everytime when i send the G29 command i got the message that the Z Endstops are hit after the third position are tested. Can anyone help me? thanks a lot Tarzipanby Tarzipan - General Mendel Topics