Heyy thanks for the help it worked somehow endstops pins were after 2nd extruder really thanks man for all your help !! really appreciate it !!by kptroy09 - General Mendel Topics
no its still not working i even inverted the directions only x and z are homing.by kptroy09 - General Mendel Topics
they are replying properly when i trigger them manually but it still is not moving in opposite directionby kptroy09 - General Mendel Topics
it replied Hby kptroy09 - General Mendel Topics
Hi, thanks for your suggestion i tried that actually am getting motion in just one direction now not in opposite direction anything i need to do more ?by kptroy09 - General Mendel Topics
All axis are showing this problem no i didnt changed the code of sprinter, i adjusted the vref of drivers correctly, i kept the step/mm as default same goes with the microstepping !! do i need to change anything in microstepping ?by kptroy09 - General Mendel Topics
Hi Guys! I am facing one issue with my Prusa i2 the things is while working my Ramps extruder heater was not heating up so I changed the Ramps 1.4 and now when am connecting it to my printer axis are not moving I did the connection double checked everything even changed and tested with other ramps but the problem is still there is no movement it's giving little jerk and stop moving. if anyoby kptroy09 - Prusa i3 and variants
hi everyone please help me in this problem am using Prusa i2 uploaded the sprinter firmware and tested by changing the motors, changing the drivers, ramps 1.4 and what not, I tried everything but am still getting the jerking sound can anyone please help me what changes shall I make in Sprinter firmware to get the smooth operation for the printer please help. or is there anything that needs to beby kptroy09 - General Mendel Topics
Hi !! I printed this model using Cura Slicer engine. I used PLA filament of 1.75dia providing layer height of .1mm shell thickness of 1.6mm(even tried for 0.8, 1.2, 2.0 and 2.4) and fill density of 20%(even tried for 40%) the image attached is without support i also tried with support also i got the same result with much more bad surface finish due to supports. i really don't know what to do to gby kptroy09 - Printing
Hi !! I printed this model using Cura Slicer engine. I used PLA filament of 1.75dia providing layer height of .1mm shell thickness of 1.6mm(even tried for 0.8, 1.2, 2.0 and 2.4) and fill density of 20%(even tried for 40%) the image attached is without support i also tried with support also i got the same result with much more bad surface finish due to supports. i really don't know what to do to gby kptroy09 - Printing