QuoteBee69 Hi Guys. Have you tried this. yeah ive looked at that theres alot of question and not many answers lolby Thereaper - Prusa i3 and variants
QuoteDust only the tiny bit in the middle from 11:16:36.295 : echo: M92 X78.74 Y78.74 Z2560.00 E105.00 to 11:16:37.642 : FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL: PROTOCOL_VERSION:1.0 Are stetting, from a m503 command. No thermistor settings, no direction of movement, or anything about endstops The bit "for gen6" worries me Are you sure you have a 2560 chip?by Thereaper - Prusa i3 and variants
this is wot it show in rephost in the log box 11:16:16.833 : OpenGL version:3.3.0 11:16:16.833 : OpenGL extensions:GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_clear_buffer_object GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_debug_output GL_ARB_depth_by Thereaper - Prusa i3 and variants
QuoteDust All setting must be manually transferred from the old configuration.h to the new. (and you cant just copy the file, the format has changed) If you don't have the original configuration.h most can be retrieved with a M503 command (print settings) but not all.. and the remaining one are important (type of thermistor, direction of movement, and endstop setting) If you dont know your theby Thereaper - Prusa i3 and variants
Hi all i have a Ebay CTC prusa i3 pro b clone(ply wood one) printers it has the mega 2560 board and chip white pcb on it, i want to upgrade to the latest marlin as i want to try out the auto bed leveling and have got the bigger full graphic Smart Controller LCD12864. problem is i have done a bit of reading up and some say you need to put a bootloader on first with a uno board(which i have).But oby Thereaper - Prusa i3 and variants
pla i been using this and found it good bit dear but there ya goby Thereaper - General
i had the same prob i turned off Rep server and reinstalled usb driver for the printer not had it since touch woodby Thereaper - Prusa i3 and variants
Quoteo_lampe Why do I see so many p0rn-ads, when I open your links??? About the overhangs: You have to use small layerheight and good part cooling to fix that problem. Some slicers allow variable layerheight, so you can change it to normal height, when the overhang is done. porn links lol i dont see them when i open them must just be your bad pc lmao thanks for the info will look into the layby Thereaper - Printing
Hi all Been trying to sort out why im getting bad corners when the item is standing upright on the heatbed,see pics.all others corner are fine its just seems it only overhang corners from a flat base ive tried slowing print down less heat on the bed slower/speeding fan speed when cooling. top corners and domes at the finish of the print are good as shown in picture. im using prusa i3 clone PLA @by Thereaper - Printing
Quoteadamb502 I am having the same problem with printing. I have downloaded the latest version of Repetier try cura in repetier instead of slicer i get very good printsby Thereaper - Prusa i3 and variants
i have a I3 clone had the same problem . i changed the threaded rods to T8's and base clamps sorted mine out a treat But i did find it worse with white filament for some reason,getting nice new. have a look on youtube for 3d z banding helped meby Thereaper - Prusa i3 and variants
first of i would recheck all your connections there are a few 5v regulators pics below of wot some look like but i dont know what board you have. they do have numbers on which you can look up in google and get the data sheets for to tell what each component is. But im just guessing here its a 5v reg as thats wot runs most LCD's hopefully someone else has had the same problem and knows your mby Thereaper - Prusa i3 and variants
yeah the hotend has to be at temp before you can extrude its just a safety feature.heat the hotend up then you can use the manual button to move the or see if the motor turns as for the LCD not working sounds like it could be a voltage Regulator gone on the main board but no dout someone will correct me if im wrongby Thereaper - Prusa i3 and variants
why cant you get a higher amp 12v p/s to cope with the heat bed instead of changing everything to 24v!!by Thereaper - Prusa i3 and variants
Hi i have the CTC i3 prusa and i have the bed at 60 and print at 215 and use masking tape works a treat also got the ally heatbedby Thereaper - Prusa i3 and variants
Hi try this i have the same printer works a treat with no problemsby Thereaper - Prusa i3 and variants
have you plug it in the right place? also when i first got one of these i stripped all the extruder apart and sometimes so i was told they get stuck on first install failing that take the stepper off and plug it in the Z or Y axis see if the motor responds just to check if the motor is okby Thereaper - General Mendel Topics
Quoteobewan Repetier host has a built in eeprom editor, you can change the Zsteps/mm and Z max feedrate via that editor Hi yeah been having a play about today as ive been off work found out there was aeeprom editor after reading through the forum for over an hr lol trouble is it reverts back everytime the machine is switched off .is there a way to write this to the eeprom ive saved my originaby Thereaper - Prusa i3 and variants
Hi yeah there are 3 jumpers in place! so does that mean i can upgrade the firmware?or is that so i can just change the stepsby Thereaper - Prusa i3 and variants
Hi im using repetier host on my pc that its connected to,when its connected i get this info on the log screen below says marlin!! 11:16:16.833 : OpenGL version:3.3.0 11:16:16.833 : OpenGL extensions:GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_clear_buffer_object GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conseby Thereaper - Prusa i3 and variants
Hi hmm so any idea where i put this info i did flick through the LCD and find zstep/mm it had 2560 something for the 8mm threaded rods. is this where i put the 400, the other problem is where i changed the Zsteps/mm from the 2560 to wot i thought was right (1600) it reverts back to the 2560 again. is there something im missing!!by Thereaper - Prusa i3 and variants
Hi all newbie to this 3D printing ive bought one of the Pursa i3 clones here got it for £100 ive done a few upgrades one being changing the Zaxis 8mm threaded rods to these ive been on the prusa calculator for changing the steps 1600 it came up with put that in but the prints still coming out very wrong Height wise,seem the nozzle is lifting to high for each layer. tried a trial piece tby Thereaper - Prusa i3 and variants