Show all posts by user

Re: [Australia] MakerSlide, local and affordable - 13 years ago

HI.. Sounds great, I will have to save some money.. Auzze

by Auzze - Australia, Sydney RUG

Re: [AU] For Sale Kossel Frame - 13 years ago

HI.. No belts are used as you use fishing line which is included, All you need is motors, hotend and electronics. As for the printbed I was going to use a piece of square MDF and screw it to the almu ext. Plus a Mk7 pinch wheel for the extruder and springs. Thanks Auzze

by Auzze - For Sale

[AU] For Sale Kossel Frame - 13 years ago

HI.. I have far too many projects on the go so I have decided to let some go. I'm selling my Kossel frame. You will get the following. Set of printed parts in PLA green Alum ext (15x15) 600mm Hardware (nuts/bolts/washers) Bearing.623 and 608 supplied and fitted 6 x 250mm arm made up of traxx ball joints and M4 allthread (will supply GF tube if needed) Airtriper extruder (included is the

by Auzze - For Sale

FOR SALE - Kossel frame and others - 13 years ago

HI.. I have far too many projects on the go so I have decided to let some go. I'm selling my Kossel frame. You will get the following. Set of printed parts in PLA green Alum ext (15x15) Hardware (nuts/bolts/wshers) Bearing.623 and 608 fitted to rollers 6 x 250mm arm made up of traxx ball joints and M4 allthread (will supply GF tube if needed) Airtriper extruder (included is the 608 and 5mm bea

by Auzze - Australia - for sale

Re: Mendel printed parts? - 13 years ago

HI Rob What parts do you need, a full set or just a few bits. Auzze

by Auzze - Australia, Perth RepRap User Group

Re: urgent - walk in shop store with extrusion tbolt - 13 years ago

HI.. take a look here, Auzze

by Auzze - Australia, Melbourne RUG

[AU] Kossel parts FOR SALE - 13 years ago

HI.. I have a set of orange Kossel parts for sale These parts have been cleaned, drilled and rollers taped, so you can start building once you get them. Included is an Airtripper extruder. Price is $50.00 plus $12.00 postage world wide. Drop me a PM if you are interested. Thanks Auzze

by Auzze - Plastic RepRap Parts for Sale

Kossel parts for sale - 13 years ago

HI.. I have s et of Kossel parts in orange to sell. Price is $50.00 plus $5.00 for postage to antwhere in Australia. All parts have been drilled and taped on the rollers. Drop me a PM if you are interested. Auzze

by Auzze - Australia - for sale

Re: I mec proto for 900 $ - 13 years ago

HI Some images would be nice... Auzze

by Auzze - Australia - for sale

Re: [WorldWide] $50 For Any Printed RepRap Set - 13 years ago

Hi.. I would like to add that I brought a set of Rostock parts and found them to be a high standard, all the bolts/nuts fitted with very little clean up. Auzze

by Auzze - Plastic RepRap Parts for Sale

Re: [WorldWide] $50 For Any Printed RepRap Set - 13 years ago

Hi.. I would like to add that I brought a set of Rostock parts and found them to be a high standard, all the bolts/nuts fitted with very little clean up. Auzze

by Auzze - Plastic RepRap Parts for Sale

Re: Mendal90 or Prusa? - 13 years ago

I would go with the new Prusa i3 Auzze

by Auzze - General

Re: Filament Supply, is there room for another local supplier - 13 years ago

Hi.. Their is always room for more suppliers of filement. Keep your prices at a good level and you should do OK. Maybe talk to Vik in NZ and become the Australia dealer for his ABS and PLA, good filement. Auzze

by Auzze - Australia, Melbourne RUG

Re: Hello Thingy, my Mendelmax printer build - 13 years ago

HI.. That look cool.. If you are having problems with parts, just ask the person you brought them from to replace them.. As they should stand behind the parts. Thanks for sharing Auzze

by Auzze - Australia, Melbourne RUG

Re: New User With Some Questions - 13 years ago

Hi.. Not sure about the first but makergear make a very nice printer, his hotend is one of the best out there and his printed prats look great. The price could be the quailty of of printed parts, high layer high, less infill making the parts not as strong, cheap motors, diffrent electronics. It could be a number of things. Just remebr you get what you pay for. Other printers to look at are Ros

by Auzze - General

Re: Can't upload Marlin - stk500v2_ReceiveMessage(): timeout - 13 years ago

try using arduino 23 Auzze

by Auzze - Sanguino(lolu)

Re: GT2 Belts and Pulleys - Now in Stock! - 13 years ago

HI.. Good stuff but if these are for the rostock we needed 762 teeth belts.. those are to short.. Auzze

by Auzze - For Sale

Re: The death of Thingiverse? - 13 years ago

HEy.. I have removed all my stuff aswell... WHAT I DESGIN, I OWN AND ENJOY SHARING Auzze

by Auzze - General

(AU) Rostock printed Parts - 13 years ago

HI.. I'm looking for a set of Rostock printed parts at a cheap price. Auzze

by Auzze - Wanted

Re: almost decided to go solidoodle, why pay more for diy? - 13 years ago

Hi.. While it's good to buy a 3D printer all ready to go but doing so doesn't give you the smarts to fix a problem and can be very off putting when you can't find the answer. Now by building a 3D printer gives you skill you that will improve your life. Yes, it does cost a heap more but tracking down the stuff you need is all part of the fun, what printer to build, parts to buy, electronics to b

by Auzze - Australia, Melbourne RUG

Re: Next Melbourne Meetup - 13 years ago

HI.. I still think you should announce any meeting here and not soley on the CCHS google list. As this fourm in the first place most people look for info on 3D printers. Auzze

by Auzze - Australia, Melbourne RUG

Re: PLA and ABS 3mm and 1.75mm - 13 years ago

Jamie.. No, you can sell your 3d printer related stuff here. Auzze

by Auzze - Australia - for sale

Re: Kwando checking in - 14 years ago

HI.. You will only get a 0.1mm layer if you use a small nozzle, I have done this by using a .15 nozzle I had made, You will also have to make sure your extruder doesn't slip and run your temp up high so it melts quicker. Your print will also take a heap longer to print, I use this setup to print small gears for my model trains. Auzze

by Auzze - Australia, Melbourne RUG

Re: Heatsinks for Stepstick - 14 years ago

HI.. Just superglue some M4 nuts to the chip. Auzze

by Auzze - Australia, Melbourne RUG

Re: Problems that popped up building a Prusa - 14 years ago

sgall Wrote: ------------------------------------------------------- > This post is intended for people, like myself, who > may not familiar with a number of technical things > when building a Prusa. > > The post is in the form a fairly freeform list. I > intend to more structured notes later. > > Mistakes I made during the build of the frame: > > 1. Y axis moto

by Auzze - Australia, Melbourne RUG

Re: Please help me Ramps 1.4 install. - 14 years ago

HI.. Sounds like you have a short on the ramps board.. Check all your solder joints, maybe even re solder them.. Also check you have the parts around the right way. Auzze

by Auzze - RAMPS Electronics

Re: Suitable glues for heatsinks? - 14 years ago

HI.. A small drop of super gule it all you need, I have been using it for months without a problem.. Auzze

by Auzze - General

Re: For Sale - SDRAMPS add-on - 14 years ago

Bump

by Auzze - Australia - for sale

Re: FOR SALE - 1.4 RAMPS Sheilds with SDramps - 14 years ago

Bump

by Auzze - Australia - for sale

Re: Bearing and Rod lubrication - 14 years ago

HI.. I think supercheap sell some for about $20.00 Auzze

by Auzze - Australia, Melbourne RUG