Show all posts by user
Prusa i2, Prusa i1, Prism, Sells, and other Mendel variants
Re: Thermistors - 15 years ago
Hi I brought some from they have it on sale for £1.17 per meter. Hope that helps. Auzzeby Auzze - Australia, Melbourne RUG
Re: Group catch-up - 15 years ago
Hi Feb the 20th @ 1:00pm works for me. Auzzeby Auzze - Australia, Melbourne RUG
Re: BOTMILL NEW AND IMPROVED! PLUG AND PRINT 3D PRINTER! - 15 years ago
HI.. I was looking to buy some PLA which I add to the cart and goto the checkout and it adds an extra 10lb roll... I DON'T want the extra 10lb roll just one 5 lb roll... So untill you fix it I will spend my $$$ elsewhere.......... Auzzeby Auzze - For Sale
Re: How to set the Z axis home? - 15 years ago
Hello.. I set mine so I can slide a peice of paper with some drag beween the nozzle and the bed..As for leveling I just move the x/y to diffrent places and use the paper under he nozzle, after a few mins you should be setup. Auzzeby Auzze - General Mendel Topics
Re: Calibration woes - 15 years ago
HI After doing about 10 20mm tt blocks I just sick of wasting plasic. So I remove the extruder and put a pen in the hole, stuck a peice of paper on the bed and draw line in step of 10 and 100. At the same time I had the firmware open and after doing a test and mesuring the travel, I changed the setting in the fireware and uploaded, and reset the control board.. In the end I have the x a y to .01by Auzze - Reprappers
Finshed - 15 years ago
HI.. I have been looking at buying a heated bed (http://www.reprapsource.com/en/show/6403) and have been offered a better price if we buy 5 units. Prices. If we can get 5 units cost will be $55.00AU + $5.00 postage If I we get 10 units cost will be $50.00AU + $5.00 postage Payment via paypal, money order. So if you would like one please PM me here or e-mail auzzem&#by Auzze - Australia, Melbourne RUG
Re: Thermistors - 15 years ago
HI.. Just wondering where we can buy some of this PTFE tubing??? Auzzeby Auzze - Australia, Melbourne RUG
Re: pololu stepper driver is dead - do I need to pullup ENABLE? - 15 years ago
AgeingHippy Wrote: ------------------------------------------------------- > I am pleased I included the 'unnecessary' LEDs to > indicate power to the board and energising of the > coils. HI, great you fixed your problem. Just one question, where did you add th LEDs to the board as it would be good to have some type of inducator if they are working. Thanks Auzzeby Auzze - Controllers
Huxley chassis plate - 15 years ago
HI.. I have built my Huxley to the large size as per rod sizes in the wiki, I now to make the chassis plate and was wondering if I just use the original size or do I make it larger, if the later what size I make it. Also is 6mm MDF ok this this. Thanks Auzzeby Auzze - Huxley
Re: Another Melbourne Mendel in the making - 15 years ago
Hi and welcome Steve I too myself are busy with a Huxley build, Hoping to do a test print in 2 weeks but we will see. Chat later. Auzzeby Auzze - Australia, Melbourne RUG
Re: Group catch-up - 15 years ago
HI.. You can add me to the list, late Jan or early Feb is a good time. A BBQ would be great. Thanks Auzzeby Auzze - Australia, Melbourne RUG
[AU} Extruder Controller 2.2 - 15 years ago
HI.. I'm looking for a Extruder Controller 2.2 Motherboard, if you have a spare one please let me know. Payment via paypal. Thanks Auzzeby Auzze - Wanted
Re: Huxley bearing count - 15 years ago
HI.. Thanks, now thats 3 diffrent count.. I'm just going to buy 50/10 and then I will have spares. Auzzeby Auzze - Huxley
Huxley bearing count - 15 years ago
HI.. I have found 2 BOM for the Huxley but both have diffrent bearing counts. So before I place the order, Can someone please tell me the corret count so I can have them ordered. Thanks Auzzeby Auzze - Huxley
ABS/PLA Group BUY - 15 years ago
HI.. I spent most of the day trying to track down some PLA or ABS here in OZ.. NO luck at all... So I have been think that maybe we need to do a group buy if we can get a good price. I'm hoping we can get a 1kg for about $25.00 but that not a finally figure. The only problem I see is that it would all have to be pre-paid for using paypal. Let me know what you think before I start the foot workby Auzze - Australia, Melbourne RUG
Huxley Build - 15 years ago
HI. I'm starting to collect the parts to build a Huxley Reprap printer. I noted in the Huxley BOM there is no listing for bolt. Before I go and buy a heap of not need bolts can someone list what bolts are needed. Also, I'm thinking I will build the larger version, so just need to know what sizes to cut all the rods. Thanks Auzze Australiaby Auzze - Huxley
Re: Forum for Melbourne user group - 15 years ago
HI.. Starting to collect part for a Huxley reprap. I went this way to try and keep costs down but once done I will print parts off for the bigger Mendel. Total noob on this but have played around with electronics for years. Being based in Ballarat I'm only a hour drive down the HWY if we have a get together. I will post some images once I start the build Thanks Auzzeby Auzze - Australia, Melbourne RUG
Java problem - 15 years ago
HI.. I'm running the lastest java on my Win7 64-bit system and I keep getting this problem C:\Windows\system32>rem Amount of RAM to allow Java VM to use C:\Windows\system32>set REPRAP_RAM_SIZE=1024M C:\Windows\system32>rem reprap.jar file and stl file C:\Windows\system32>set REPRAP_DIR=C:\Program Files\Reprap C:\Windows\system32>rem Java3D and j3d.org libraries C:\Windows\syby Auzze - RepRap Host
[AU] *NEEDED* MENDEL PARTS (Australia) - 15 years ago
Hello I'm looking to buy a parts kit as I have started collecting the hardware. Anyone help with a very reseanable price. Happy to buy in from overseas !! Parts sorted Thanks Auzze Ballarat, AUby Auzze - Wanted
Re: Welcome to MRUG - 16 years ago
HI.. Very new to all this but I think I will throw my hat in and start a build. I have been looking at a LaserCut Mendel Gen 3 kit and suppling the hardward myself. Just need to understand the exuder stuff. Oh, I'm in Ballarat Auzzeby Auzze - Australia, Melbourne RUG