Show all posts by user

Re: Skeinforge 35 - 13 years ago

Ik gebruik skeinforge, maar iets recentere versie 39. Wat is precies je probleem? Foto's helpen zeker

by brupje - Dutch User Group - Archive

Re: Temperature fluctuation - 13 years ago

Thanks, well the fun thing is: when I power the MEGA through the DC barrel without the diode, the temperature fluctuates again. So only if I power through the diode with the PSU, I get stable temperature readings. I am a bit lost at this point @brnrd: I am not an electronics guy, I simply test it and these are my findings: stable temperature readings with diode, unstable without.

by brupje - RAMPS Electronics

Re: Temperature fluctuation - 13 years ago

If it is the firmware, why would the diode fix my problem then?

by brupje - RAMPS Electronics

Temperature fluctuation - 13 years ago

After one of my Arduin MEGA boards died on me, I blamed the diode on the RAMPS board. So I cut it out to prevent future dead mega's. But after I do that my temperature fluctuates enormously. Before it was lik max 2 degrees C, but now it is more than 20 degrees. This makes it hard for the reprap to correctly heat up and keep the heat. So for now I have reattached my Diode, but i am afraid it w

by brupje - RAMPS Electronics

Re: Surface Finish Improvement - 13 years ago

Great results, thanks for sharing

by brupje - General

Re: X Y axis accuracy doubled. - 13 years ago

This looks great, I can't wait to see some prints coming out

by brupje - Developers

Re: Firmware freeze when moving z-axis - 13 years ago

your welcome, my reprap is currently all the baby I need

by brupje - Reprappers

Re: Mendel bouwer (beginner) - 13 years ago

Veel plezier met bouwen iig Woon inderdaad niet in de buurt van Den Helder Schijnt wel een reprapper op texel te wonen...

by brupje - Dutch User Group - Archive

Re: Reprap error – Software freeze at axis is this because of an RXTX mismatch or something else? - 13 years ago

I am having the same problems. Connecting with the arduino software and querying for temperature through the serial monitor returns the temperature fine. Seems like a 64-bit host problem...

by brupje - RepRap Host

Re: CHEAPEST PLA in EUROPE rest of MAY! - 13 years ago

Well, of course if you order larger quantities with me I can give discounts too. But it's not really fair, because I don't have to make profit on it, just break even. So I can work with minimal margins. Any product I sell I needed for myself, and by buying in larger quanities I am able to provide the reprap community with cheaper sourced items. Good luck to you too!

by brupje - For Sale

Re: CHEAPEST PLA in EUROPE rest of MAY! - 13 years ago

Not the cheapest I am way cheaper

by brupje - For Sale

Re: Skinning - 13 years ago

looks great! This could be a useful feature in skeinforge

by brupje - Reprappers

Re: Ultimachine? - 13 years ago

Or mail me :p

by brupje - Controllers

Re: RAMPS bare PCB + H21LOB - 13 years ago

New supply of bare RAMPS pcb's arrived today!

by brupje - For Sale

PLA & ABS, multiple colors - 13 years ago

New supply of PLA and ABS has arrived. Multiple colors available. Check

by brupje - For Sale

Re: extruder jam - 13 years ago

How did you fix that? I might be experiencing the same problem wile printing larger objects. While printing the infill the extruder seems to jam in the PTFE barrier

by brupje - General

Re: Android Open Accessory Development Kit - 13 years ago

Will a Mega1280 work also?

by brupje - RAMPS Electronics

Re: Next RepRap - 13 years ago

I have RAMPS boards available

by brupje - General

Re: Different MOSFET for RAMPS - 13 years ago

I don't think it is a good idea to draw 15A over the ramps board though.

by brupje - RAMPS Electronics

Re: RAMPS bare PCB + H21LOB - 13 years ago

i've added a picture to my ebay item

by brupje - For Sale

Re: step by step software - 13 years ago

Then you might want the fiveD firmware

by brupje - Reprappers

Re: RAMPS bare PCB + H21LOB - 13 years ago

I also sell fully assembled PCB boards now

by brupje - For Sale

Re: step by step software - 13 years ago

What electronic kit did you buy?

by brupje - Reprappers

Re: Different MOSFET for RAMPS - 13 years ago

any TO-220 N-type MOSFET rated for >=60v and >=50A should do. Look like the STP55NF06 is in stock though, just not de L version.

by brupje - RAMPS Electronics

Re: Waarom zijn 'printed-parts' zo duur? - 13 years ago

Hoop dat het lukt, is alleen maar goed voor de community

by brupje - Dutch User Group - Archive

Re: Trying to find source for RAMPS - 13 years ago

I do have ramps boards available. Check my ebay

by brupje - RAMPS Electronics

Re: Electronics - 13 years ago

Dank je Inmiddels heb ik het probleem kunnen oplossen, allemaal configuratie settings die ik moest instellen maar niet had gedaan Hij is nu echt heel stil in vergelijking met mijn gen3 spul

by brupje - Dutch User Group - Archive

Re: RepRep Book - 13 years ago

So how would that be different from the wiki?

by brupje - General

Re: Who are you people? - 13 years ago

I am working in the IT as software developer, with very little education in electronics The open-source parts is very important to me

by brupje - General

Re: Extruder in reverse - 13 years ago

Or change the fiormware to inverse the stepper for the extruder

by brupje - Reprappers