Show all posts by user
Prusa i2, Prusa i1, Prism, Sells, and other Mendel variants
[RRW] Megatronics v2.0 available! €79.99 - 11 years ago
Announcing the direct availability of Megatronics v2.0, the new version of our populair Megatronics line of Reprap Electronics. This board is the best value for money, all these features for only €79,99. Major features: Atmega2560 Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz Thermo couple (2x) On board support for connecting two thermo couples SD Card Autonomous printby brupje - For Sale
Re: Megatronics v2.0 - 11 years ago
Sources have been released, also I updated the wiki and there is a marlin version available. First kits ship mondayby brupje - Reprappers
Re: Repetier + Megatronics + Thermocouple - 11 years ago
ANALOG_INPUT_CHANNELS seems to be defined in repetier.h I would say EXT0_ANALOG_CHANNEL is not defined correctly in repetier.h , because this line it wrong: #if NUM_EXTRUDER>0 && EXT0_TEMPSENSOR_TYPE<100 I think it should be #if NUM_EXTRUDER>0 && EXT0_TEMPSENSOR_TYPE<101by brupje - Repetier
Re: Repetier + Megatronics + Thermocouple - 11 years ago
By the list of posibilities I would say 100 is the correct value, the AD597 is compatible with 595. You will have to define the correct pin in pins.h, which is analog nr 8. In marlin: #define TEMP_0_PIN 8 // ANALOG NUMBERING I don't know why it comes up with the mosi/sck etc. The chip does not require that, maybe it's enabling SD card? But may adding this will help: #define SCK_PINby brupje - Repetier
Re: [RRW] Megatronics v2.0 PRE ORDER €74,99 - 11 years ago
I have released an preliminary datasheet: megatronicsv2.pdfby brupje - For Sale
Re: Megatronics v2.0 - 11 years ago
I have released an preliminary datasheet: megatronicsv2.pdfby brupje - Reprappers
[RRW] Now available: Caramic heater cartridge €4.49 - 11 years ago
Increase the reliability of your extruder with this heater cartridge. Also it heats up faster. It fits nicely in our extruders, so it's an easy replacement. Voltage: 12V Power: 40W Wire length: 1m Cartridge length: 2.3cm Cartridge diameter: 6mmby brupje - For Sale
[RRW] Printing stickers - 11 years ago
Now available on reprapworld.com, printing stickers. Very good adhesion with PLA, reduce warping dramatically! Stick this stuff to your glass or PCB heated bed. Very smooth surface for your prints. This is a set of 5 pieces printing sticker.by brupje - For Sale
Megatronics v2.0 - 11 years ago
Megatronics v2.0, the new version of our populair Megatronics line of Reprap Electronics, is expected februari 16th. I will publish sources and datasheet as soon as they are ready for publishing. Major features: Atmega2560 Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz Thermo couple (2x) On board support for connecting two thermo couples SD Card Autonomous printing fromby brupje - Reprappers
[RRW] Megatronics v2.0 PRE ORDER €74,99 - 11 years ago
Announcing the availability of Megatronics v2.0, the new version of our populair Megatronics line of Reprap Electronics, expected februari 16th. This board is the best value for money, all these features for only €79,99. As pre order discount, now only €74,99! Major features: Atmega2560 Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz Thermo couple (2x) On board support forby brupje - For Sale
[RRW] Mendelmax Extrusion set €54.99 - 11 years ago
This kit has all extrusions you need for a MendelMax 1.5 including all T-slots and 4 self-tapping M5 screws. This Set Includes: 2x 420mm Misumi extrusions (already drilled 70mm from each end) 4x 420mm Misumi extrusions 4x 340mm Misumi extrusions 4x 300mm Misumi extrusions 4x M5x20mm Self-tapping screws with Torx head 1x Package of 100 t-slot nutsby brupje - For Sale
[RRW] PLA/ABS clearance sale 10% off ~13€/KG - 12 years ago
We are going to clear out some 2 and 2.3KG spools and give 10% discount. So thats about 13€/KG!by brupje - For Sale
Re: New printer electronics: Megatronics - 12 years ago
I have added some information to the wiki - Fix for problems when uploading firmware in Windows - Basic setup layout - Dual extruder setup layoutby brupje - Reprappers
Re: New printer electronics: Megatronics - 12 years ago
Megatronics support has been added to the official Marlin repository, so you can run now the latest Marlin easily with Megatronics.by brupje - Reprappers
[RRW] New ABS colors €16.49 / KG, Silver PLA - 12 years ago
A lot of new colors for ABS are introduced: nuclear green, pink, orange, light blue and gray For PLA we now also offer the colors: gray, light blue and silver Most colors are now available again!by brupje - For Sale
Megatronics kits available! € 89.99 / € 179.99 - 12 years ago
Besides our new electronics Megatronics fully assembled for € 59.99 we now also sell kits with Megatronics Basic kit € 89.99 4x Stepstick 1x Megatronics v1.0 - Fully assembled 1x Heatsinks for pololu / stepstick stepper drivers (set of 4) Prusa Kit € 179.99 1x Thermistor 100K 5x NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm 1x Megatronics v1.0 - Fully assembled 4x Stepstick 1x Heaby brupje - For Sale
Re: New printer electronics: Megatronics - 12 years ago
Here is a vid of the Megatronics posted on youtube:by brupje - Reprappers
Re: [RRW] Now available: Megatronics €59.99 - 12 years ago
Here is a vid posted on youtube:by brupje - For Sale
Re: New printer electronics: Megatronics - 12 years ago
Boards are available now. Shipment starts Monday, but it may take a few days to catch up wil the pre-orders though.by brupje - Reprappers
[RRW] Now available: Megatronics €59.99 - 12 years ago
After a long wait the boards are finally available! Major features Atmega2560 Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz Thermo couple On board support for connecting a thermo couple SD Card Autonomous printing from Micro SD card on board LCD support Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yetby brupje - For Sale
Re: [RRW] Heated bed PCB €24,99 - 12 years ago
The heated bed is back in stock after a rather long delay.by brupje - For Sale
Re: New printer electronics: Megatronics - 12 years ago
It was created with DesignSpark. It's a freeware program.by brupje - Reprappers
Re: [RRW] Megatronics pre-order available €54,99 - 12 years ago
pre-order discount will no longer be available after 16th of August.by brupje - For Sale
[RRW] Glow in the dark PLA €34.99 / KG - 12 years ago
Now available on Reprapworld.com: glow in the dark PLA. Available on 1KG spools, 500G loose or per meter.by brupje - For Sale
Re: New printer electronics: Megatronics - 12 years ago
I finally come around cleaning and uploading the schematics.by brupje - Reprappers
Re: [RRW] Megatronics pre-order available €54,99 - 12 years ago
not yet unfortunately But you helped for sure!by brupje - For Sale
Re: [RRW] Megatronics pre-order available €54,99 - 12 years ago
first 30 boards sold alreadyby brupje - For Sale
Re: [RRW] Megatronics pre-order available €54,99 - 12 years ago
If you are interested in reselling or buying larger quantities, please contact me at info at reprapworld dot com. I have some demo boards available for testing.by brupje - For Sale