Show all posts by user
Designs that do not fit in other categories. Previously named "New RepStraps and Post Mendel"
Re: lcd controller problems - 12 years ago
I've figure out a solution in case anyone was wondering.... in the firmware I lowered the max current and increased the PID functional range. This worked for me. If this still isn't working I plan to turn off PIDTEMP and just use Bang Bang.by msandersmay10 - General
lcd controller problems - 12 years ago
Hi, I'm having problems with my lcd controller. The main issue is with the hot end temperature control. The issue is that the set temperature is overshot everytime and fluctuates rapidly. I've autotuned with pronterface with no luck. The issue doesn't happen when I attach it to my laptop only when attached to the lcd controller. I never had this problem when I first got the item and am wondby msandersmay10 - General
part looses hold on heated bed - 12 years ago
Hi, I'm having trouble trying to get a small part to maintain its hold onto the heated bed. About 30% into the print the hotend will knock it off. I'm printing with PLA and have tried pretty much everything from turning the heated bed up high to not having it on at all. Does anyone have any suggestions? thanks Kyleby msandersmay10 - Reprappers
Re: Print from SDRAMPS - 12 years ago
Hi, Does anyone have a definite answer to this question? Like most people I have checked that the D1 diode is connected. I load the file from the pronterface but when I disconnect my usb cord it stops. SD support is enable in the printer firmware. thanks msandersmay10by msandersmay10 - General
Re: Failure to get a decent first layer - 12 years ago
turn the heat up! I set my first layer at 240! And thats with PLA. Then I turn it down after the first Msandersmay10by msandersmay10 - Mendel90
basic test - 13 years ago
Hi, I'm trying to do a basic test on my sanguinololu after getting it assemble using pronterface. Do i need all drivers inserted to do that. I'm not getting any movement from the motor thanksby msandersmay10 - General
Re: avrdude: AVR Part "atmega1284p" not found. error - 13 years ago
Here's how to fix it.... 1. Go to arduino.cc download the arduino 0023 version 2. Go to . Hit the zip button to download a zip file 3. Paste the sanguino file from github into the arduino-0023>hardware file 4. In the arduino-0023 file go to arduino-0023>hardware>tools>avr>etc. 5. Delete the avrdude.conf file and paste in the avrdude file from the github: sanguino1284p-master&gby msandersmay10 - Reprappers
Re: atmega 1284p - 13 years ago
Just to confirm what shippo0708 did. It also work for my sanguinololu 1284p as well....thanks for the info! msander6by msandersmay10 - New Zealand RepRap User Group
Bootloader installed? - 13 years ago
Hi, I was wondering if there's a way to check if your bootloader has been installed? I'm having troubles with installing the firmware and want to backtrack to confirm whether the usbasp correctly installed the bootloader. thanks msandersmay10by msandersmay10 - Controllers
Re: avrdude: AVR Part "atmega1284p" not found. error - 13 years ago
Can someone address this problem. Were still having problems. Does it have anything to do with the bootloader? Thanks Matthewby msandersmay10 - Reprappers
Re: Adesina - A Wooden Mendel RepStrap - 14 years ago
Hi, I'm trying to build a reprap from scratch instead of buying the parts. I was wondering what you guys did to make them. I've been experimenting with a couple software programs but haven't found a good one to print 2d patterns of the 3d structures. Thanks Mattby msandersmay10 - General New Machines Topics