Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 12 of 12
I have a strange request. I just started playing with the Marlin FW code and I need some help. I need help finding the x-y coordinates just before they are sent to the stepper motors. If you care to know why continue reading. If you don't care to know why and you know the answer to my question, please comment.
I assume the Marlin FW process the gcode in the following way:
1) Gcode parsed
2)
by
nevertoolate
-
Firmware - mainstream and related support
Where do I set the temperature for the hot end and for the build platform in Skeinforge?
From what I can see I only find two places where there are temperature settings. The first in under chamber. I can set the bed temperature there but I don't have a heat controlled chamber so I am not sure if this is the right place.
The second is under temperature. Is this where I set the temperature fo
by
nevertoolate
-
Skeinforge
OK. I removed all comments from the skeinfogre gcode using the settings on the export plugin. The printer is now running. However, it didn't wait for the bed or the hot end to heat up before it started to print. I guess I need to play with some more settings. Thanks for helping me figure out the comments problem. I wonder if there is a way to make skeinforge export comments like slicer (usi
by
nevertoolate
-
Skeinforge
Why don't you use skeinforge anymore? I agree that slier is easier to use but I think skeinforge creates support structs that are far supiror to slicer. Skeinforge supports and easy to remove and slicers are not. I also tend to have problems with my fill not touching my shells. Maybe I don't have slicer configured correctly?
by
nevertoolate
-
Skeinforge
That's strange. The comments were all removed from the between the parenthesis when I saved that last post.
Regardless, I looked at slicer and the comments always begin with a semi-colon. Comments from skeinforge look more like xml tags. Like this:
Parenthesis - less than - tag name - greater than - parenthesis.
I will try turning off all comments from the skeinforge gcode file and see wha
by
nevertoolate
-
Skeinforge
That's strange. The comments were all removed from the between the parenthesis when I saved that last post.
by
nevertoolate
-
Skeinforge
Lenbok, here are the first few lines of the gcode.
()
() start.gcode ()
G28 ; home all axes
()
( skeinforge gcode )
( 12.03.14 )
( 13.09.25|23:3 )
()
M103
( extrusion )
M105
Are you suggesting I remove the "; comments" from the file?
by
nevertoolate
-
Skeinforge
I have two different printers and two different cables. Both machines are running Marlin firmware. I get the same errors on both machines when I use skeinforge generated gcode files. Both machines run without any problems when I use slicer generated gcode files. I like prints done with skeinforge on my third printer (a makerbot) and I would really like to use skeinforge with my other two mach
by
nevertoolate
-
Skeinforge
I removed lines N0, N1, N3, N4, and N5 from the gcode file. I no longer get the unknown command errors. I would expect this but I would still like to know why I am getting the unknown command errors so I don't have to hand alter every gcode file I create. Now I get even more checksum errors. Now I get the following:
Error:No Checksum with line number, Last Line:0
Resend:1
Error:No Checksum w
by
nevertoolate
-
Skeinforge
I am trying to do the same thing. I am suing Skeinforge 50 to generate gcode. I then load it into Pronterface. I get a lot of unknown command errors and checksum errors. Here is an example:
echo:Unknown command:"N0 ()*78"
echo:Unknown command:"N1 () start.gcode ()*84"
echo:Unknown command:"N3 ()*98"
echo:Unknown command:"N4 ( skeinforge gcode )*61"
echo:Unknown command:"N5 ( 12.03.14 )*112"
by
nevertoolate
-
Skeinforge
OK. Thank you jbernrdis and François Delègue. I checked my firmware settings and entered a value into the Multiply Plugin and now my part is positioned correctly. I am still having problems with Checksum and unknown commands. See my errors bellow:
echo:Unknown command:"N0 ()*78"
echo:Unknown command:"N1 () start.gcode ()*84"
echo:Unknown command:"N3 ()*98"
echo:Unknown command:"N4 ( skeinfor
by
nevertoolate
-
Skeinforge
I am trying to use skeinforge to generate gcode for a Solidoodle but I cannot find where I set the size of my build platform. Can anyone help?
Thanks.
by
nevertoolate
-
Skeinforge