Γειά σου Νίκο Πρέπει να ρυθμίσεις τα βήματα των μοτέρ από το marlin για να πετύχεις ακρίβεια στην εκτύπωση. Παίζουν online calculators οπως εδώ : Και για τον κύβο που εκτύπωσες υπολόγισε: Πραγματικό μήκος / Μήκος εκτύπωσης * Βήματα Για τη γωνία ρύθμισε το retract accelaration από το firmware. Το μόνο που σου συνιστώ είναι υπομονήby IronG - Printing
Probably faulty cartridge heater ...by IronG - Delta Machines
Hi I got a metal hotend for a delta printer and when i try to heat it up, temperature won't overpass 120 - 140 C to reach printing temperatures. Any possible solutions and what causing this problem ? Thanks in advanceby IronG - Delta Machines
The sanguinololu is exactly same with this. Because i am a noob with electronics, is it worthy to replace the chip, to buy a new one or replace with arduino ?by IronG - Sanguino(lolu)
Hi everyone I've got a pusa i3 with sanguino board. Suddenly while i was printing the printer stopped and showed on lcd screen error maxtemp at extruder's thermistor. I changed thermistor, i tried to re upload the firmware but that issue continued to appear. Finally i replaced sanguino with an arduino mega plus ramps 1.4 and worked fine. Is there a solution to fix sanguino or is it dead ? thanby IronG - Sanguino(lolu)
Thnx i manage to solve it, but i have an other issue. The filament clogs in the PTFE tube, should i remove the PTFE ? And in which direction the tube must be? Inside the aluminum heater or opposite ?by IronG - Printing
You mean to adjust the stepper driver potentiometer ?by IronG - Printing
Hello My printer prints like that (image). Can someone help me out and give me some tips ? Thnx in advanceby IronG - Printing
Why endstops of the machine don't trigger? With M119 command seems to be open even they are closed. This situation caused by firmware ?by IronG - Delta Machines
Για να γίνω ποιο σαφής, το πρόβλημά μου είναι οτι όταν κάνω homing από την επιλογή του Repetier, τα endstops δεν λειτουργούν. Παραθέτω το configuration.h από το firmware #ifndef CONFIGURATION_H #define CONFIGURATION_H // This configuration file contains the basic settings. // Advanced settings can be found in Configuration_adv.h // BASIC SETTINGS: select your board type, temperature sensor tyby IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών
Επισυνάπτω και μια φώτοby IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών
Κινείται κανονικά μεσω repetier απο το manual control, αλλά από ότι καταλαβαίνω πρέπει να γίνει σωστή παραμετροποιήση στο firmware του Marlin...by IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών
Hi friends I have competed the assembly of a delta 3d printer and i have messed up with marlin firmware and repetier host settings. The printer has R.A.M.P.S 1.4 and Arduino MEGA 2560 boards. Can someone give me directions step by step ? I will be very gratefulby IronG - Delta Machines
Γειά σας Ολοκλήρωσα μια κατασκευή ενός εκτυπωτή delta και χρειάζομαι οδηγίες για να προχωρήσω σε εκτύπωση. Το firmware που χρησιμοποιώ είναι το Marlin και το πρόγραμμα το Repetier, αλλά μάλλον δε κάνω κάτι σωστά στις ρυθμίσεις και η εκτυπωση δε ξεκινάει. Τι μπορεί να κάνω λάθος; Ευπρόσδεκτη οποιαδήποτε βοήθεια.by IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών
Ωραία τα βρήκα, τα τσέκαρα και δουλεύουν κανονικά. Θα επανέλθω πάλι για όλο και κάποια βοήθεια που λογικά θα χρειαστώ. Για την ιστορία έχω αγοράσει ένα arduino mega 2560 μια Ramps 1.4, 4 A4988 stepper motor driver και 4 μοτέρ Νema 17by IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών
Γεια σας και από μένα, είμαι καινούργιος στο 3d printing και προσπαθώ να φτιάξω τον δικό μου diy εκτυπωτή. Έχω αγοράσει κάποια εξαρτήματα και προσπαθώ να κάνω μια δοκιμή στα ηλεκτρονικά κομμάτια για να διαπιστώσω αν δουλεύουν αλλά έχω χάσει τη μπάλα με τα firmware και τα προγράμματα. Μπορεί κάποιος να βοηθήσει βήμα προς βήμα μέχρι να βγάλω άκρη ; Έφαγα όλο το διαδίκτυο και άκρη δε βρήκα, επισυνάπby IronG - Greek RepRap User Group, ελληνική ομάδα χρηστών