I'm wanting a printer to replace my Monoprice maker v2. I've been lurking on this and other forums for some time now trying to educate myself on the pro's and con's of all of the different platforms. I have narrowed the field down to either a delta or a core xy machine. 300x300x300 or thereabouts is all the build area that I need. I would like to build a high quality kit and on most days I tend tby luckyflyer - General
Problem solved, Frustrated I purchased Simplify 3d and when I connected the printer to my laptop I immediately noticed that the the extruder temp was about 375C. I pulled the e-temp plug and ohmed it an it was around 14 ohms. One thing I had not mentioned because I did not think it relevant was the fact that I had to remove the extruder fan and heat sink because the filament had broke inside theby luckyflyer - Prusa i3 and variants
I finished a print on my 4 week old maker select today, everything worked well during the print. I inserted a different sd card to print the file on it but neither the extruder or the bed would heat. I've disassembled the controller and there are no burnt pins or connectors. This is a V3.5 board, the 12v supply is ok the 5v supply on the board is running 5.06v. I can move all axes manually, the dby luckyflyer - Prusa i3 and variants