Thanks, turned out the pots just weren't cranked high enough!by Josh333 - General
Hi guys, printer was working fine, (ramps 1.4 with mechanical end stops and marlin firmware) All of a sudden, when I click print, the axis will return to their endstops, including z. The z axis will then raise itself, stutter as though they are fighting something, and then lower itself again approximately 2mm below the bed. I have not changed any settings, there is no z offset set, and I have trby Josh333 - General
DELTA KIT NOW ADDED $90 - 3 metres (3x1 metre) of MakerSlide as well as a delta accessory set (3x standard laser cut MakerSlide carriages, 12 Delrin V-wheel shells, 36 washers, and 6 eccentric spacers) - posted Australia wideby Josh333 - General
Yes, please contact me in regards to shipping costs, then if we agree on the shipping cost, purchase through Indiegogo and when the time comes I will collect the aditional shipping charge before it gets sent out.by Josh333 - For Sale
Thanks for the idea Greg, will get onto thatby Josh333 - General
Campaign is now liveby Josh333 - General
Campaign is now liveby Josh333 - Australia, Sydney RUG
Campaign is now liveby Josh333 - For Sale
Am using Indiegogo, have dealt with them before and have no reason not to use them. The campaign will be fixed funding, so if it does not reach the goal of $2800 then it will not go ahead and everyones funds will be returned.by Josh333 - Australia, Sydney RUG
Hi guys, this is the brief from my campaign going live wednesday the 12th or thursday the 13th. Surely I am not the only person out there who wants such a great product to be available locally. If you're not familiar with MakerSlide, check out Barton Drings 3d printer called the ORD Bot, it is open source, simple, precise, good looking and relatively affordable and uses MakerSlide throughout theby Josh333 - For Sale
Hi guys, this is the brief from my campaign going live wednesday the 12th or thursday the 13th. Surely I am not the only person out there who wants such a great product to be available locally. If you're not familiar with MakerSlide, check out Barton Drings 3d printer called the ORD Bot, it is open source, simple, precise, good looking and relatively affordable and uses MakerSlide throughout theby Josh333 - Australia, Sydney RUG
Hi guys, this is the brief from my campaign going live wednesday the 12th or thursday the 13th. Surely I am not the only person out there who wants such a great product to be available locally. If you're not familiar with MakerSlide, check out Barton Drings 3d printer called the ORD Bot, it is open source, simple, precise, good looking and relatively affordable and uses MakerSlide throughout theby Josh333 - General
Hi Guys After the success of my last Indiegogo campaign selling Gen 6 Electronics, I am back with an even better deal!!! Theirs more info on my Indiegogo Campaign as seen here: Indiegogo Let me know what you think! I'll get more pics up ASAP. Thanks a lot Josh Sinclairby Josh333 - For Sale
Hi Guys After sorting out a few problems, I now have Gen 6 Electronics for sale They are only available for this price on this forum $130AUD will get you: - Gen 6 Board assembled and programmed with sprinter firmware - Fully assembled opto switches - Free shipping to Australia (international, please add $20) If you are interested, post here and we can organise the transaction Bulk discountsby Josh333 - For Sale
billyzelsnack Wrote: ------------------------------------------------------- > For the basic version is there anything tricky > about installing the firmware? Is there a > bootloader or anything on it already or do I would > I need to use an ISP AVR programmer? The basic version will have no bootloader an you will need a programmer Joshby Josh333 - For Sale
Generation 6 electronics are now on eBay Please note - I shoud have electronics in my possesion within 14 days, from their they will be shipped to you by regular airmail taking 5-8 days to most destinations. Get in quick! Gneration 6 Electronicsby Josh333 - For Sale
Hi bryanandaimee Retail Price will not be much more, approximately $150AUD + - $10 including shipping to most destinations I am unsure where Mendel-Parts has their boards manufactured but I believe their price is where it is due to lack of competition. The current price is close to cost to try and get my name out there but I will always be significantly cheaper than Mendel-Parts.by Josh333 - For Sale
For the next 24 hrs, I am selling fully assembled ramps 1.4 for $70 Link Get in quick, 3 available Joshby Josh333 - For Sale
Hi Guys I have started an Indiegogo campaign, All we need is 10 people for the great deal to go ahead. Click here for campaign If the goal is not reached in 2 weeks, your money will be refunded in full or we may be able to sort a deal out on the electronics. I have taken the image from the wiki, If this is not aloud, please tell me and I will remove it. Thanks a lot Josh Sinclairby Josh333 - For Sale
Yep, the baud rates are the same, any other ideas?by Josh333 - RAMPS Electronics
Hi Guys I've just got my first batch of electronics in, they are listed here RepRapAustralia world wide shipping Currently only have the RAMPS, Stepsticks and Arduino in stock, Will have GEN 6 in approx 2 weeks for $150!! Quality of the assembled components is outstanding and I guarantee you won't be disappointed. Any questions, just ask Josh Sinclair, Thomas Gates RepRapAustraliaby Josh333 - For Sale
I just finished building my ramps, I go to upload firmware and the leds flash rapidly and it says it finishes successfully. I then try and use the board, when I plug it in it flashes green twice and then just sits doing nothing, if I reset it it flashes twice again and does the same thing Repsnapper will not connect either Any Ideas? Thanksby Josh333 - RAMPS Electronics
Hi mate Can I ask what/where the machine shop is? Thanks Joshby Josh333 - For Sale
Hi Guys Im having large orders of these assembled and will have them buy friday. Who would be interested in $200+shipping for RAMPS 1.4, Arduino 2560, 4x stepstick drivers and 3 mechanical endstops. Attached are pictures of the actual product sent to me by the assembler. (in pictures, pins are not yet soldered to the RAMPS board, they will be when you receive them) Only soldering required wilby Josh333 - For Sale
Hi guys I've given up on my build so my semi complete printer is up for sale on ebay Got any questions just askby Josh333 - For Sale
Hi I was wondering, I have a techzone monolithic electronics set that is shipped to be used with nichrome What would I have to change, if anything to use a resistor heating method instead? Thanksby Josh333 - Controllers
Hi I'm after a set of mendel parts, not prusa mendel. I'm in sydney, could you do this and post? Thanks Joshby Josh333 - Plastic RepRap Parts for Sale
Hey guys Extremely interested in this printer, can someone explain what indiegogo actually is? If I buy a printer, am I guaranteed one? or does a certain number have to be reached? Looks like a great machine Joshby Josh333 - For Sale