Nice But stop making new changes I want. I cannot keep upby KtB - Delta Machines
Quotenka what is the size off that bed? Its the standard 200x200mm mk3 heated bed mounted on a di-bond sheetby KtB - Delta Machines
Printing ABS on a heated bed at 80mm a sec NICE ABS on heated bedby KtB - Delta Machines
Quotenka I got those Belt ( ), just FYI. Same as the ones i gotby KtB - Delta Machines
Quotenka They are tooth to tooth, but I think they are not tight enough into the "slot". The lower one seems be okay, but not the upper one. If I pull very hard, I see them slip (even if the bolt is tight). I think that adding something to squeeze them more will help prevent the slip. As for the best tensioner. It's just becose it's easier than unscrewing the stepper! I'll also use a spring likby KtB - Delta Machines
QuoteAndyCart QuoteKtB Only other thing i can think of it play in the belts. I have some belt tensioners on mine made from peg springs as i found it very hard to get the belts all tensioned the same. It should be fairly easy to get consistent belt tension. Just loosen the stepper mounting screws and push the motors down before you re tighten them. You could also move the top vertex up a bit buby KtB - Delta Machines
Only other thing i can think of it play in the belts. I have some belt tensioners on mine made from peg springs as i found it very hard to get the belts all tensioned the same.by KtB - Delta Machines
Are you sure the glass is actually flat a lot even mirrored is not. Also are all 6 arms exactly the same length ? Like the precision cutting of the mirror btwby KtB - Delta Machines
QuoteAndyCart QuoteKtB Hi Andy Printer is running well but I'm after a favour I am wanting to make some changes to the effector and the j-head clamp as i find the mounting holes for the fan and the spring system for the z-probe a bit fragile. Is it possible to get a copy of your sketch up files for them so i can make some modifications please. I know i can import the stl files into sketch up bby KtB - Delta Machines
Hi Andy Printer is running well but I'm after a favour I am wanting to make some changes to the effector and the j-head clamp as i find the mounting holes for the fan and the spring system for the z-probe a bit fragile. Is it possible to get a copy of your sketch up files for them so i can make some modifications please. I know i can import the stl files into sketch up but its a pain dealing wby KtB - Delta Machines
It lives Made a few modifications. I have changed the way the springs are mounted for the auto levelling to be more robust and allow a cooling fan to fit and am using Airtrippers direct drive extruder Still some calibration and tidying up to do and I think add a heated bedby KtB - Delta Machines