Show all posts by user
Rostock, Kossel, Simpson, 3DR, and more. See: http://reprap.org/wiki/Category:Delta. Previously named "Delta Robots and Stewart Platform"
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
It isn't beautiful. It works! It is important!by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Accept in a family?! I don't know how to insert the picture into the text.by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Nicholas! You don't sleep never? So much works made. and still children, they at you are unique! It seems to me that any color will badly look, if it one. contrast is necessary. for example - plastic lilac, and the case green or as to you will run, but colors have to be different. I think that it is the most interesting and successful your design, today. I hope that in these days off my Wallby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
@ Nicolas! There are questions on insertion control. You wrote earlier - the printer has to suspect 400 mm one turn of the step engine. It as? 1) Give Configuration.h 2) give comment in segmentize.py square_z=75 l=150 L=250 d=200 #print diameter y_offset=37.5 mechanical_advantage=9.5by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: LISA Simpson - 12 years ago
plastic pipes as support it isn't pleasant to me, they steal a place, it is simpler to make 2 solid walls and 1 door. it can be acryle or plywood or MDF a plate. who that will find, completely everything can be made only the hand saw and a drill. it as is useful for smooth heat - less delaminationby Vladimir_Lukashuk - Delta Machines
Re: LISA Simpson - 12 years ago
If there are strings as on your design how to get the printed vase?by Vladimir_Lukashuk - Delta Machines
Re: LISA Simpson - 12 years ago
Support or strings are necessary. that's for sure. without them the design will rotate. Strings can be taken from a bicycle wheel Why you want to use ARM the controler? It seems to me to make more simply a script for a python or a plug-in for sliseby Vladimir_Lukashuk - Delta Machines
Re: LISA Simpson - 12 years ago
@ Nikolas. cheap hairpins only for confirmation of correctness of design. If design successful then it is possible to buy expensive hairpins. From my experience: I made long ago 3D a cutting torch where leading screws were from construction hairpins. They work perfectly till this time. Basic racks are in any case necessary. such as here or similar. Or you think you shouldn't be engaged in this dby Vladimir_Lukashuk - Delta Machines
Re: LISA Simpson - 12 years ago
Hello. Nicolas! Your idea is interesting and is always unexpected. I will try to make this design. It will be in 1-2 weeks (I now on holiday and even Wally didn't manage to finish). But brain storm it is possible now. 1 for dough it is possible to buy usual construction hairpins and long nuts (in my country of Ukraine they not expensively M10 - 1 meter about 4-5 dollar is estimated. At you likelyby Vladimir_Lukashuk - Delta Machines
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Nicolas! I don't doubt correctness of your decision, it works and it is important. I simply don't know it, and asked clarifications. Probably that I badly know English. And the translator not correctly translates. your decisions. not mineby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
"Correct, but you can reverse Z stepper" Explain, what you mean? describe the decision more preciselyby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Простите 2 раза записалось сообщениеby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
I understood as to start segmentize. I don't understand some things. trailer switches aren't present, when dumping all axes =0, it is necessary to lift a bed up to a nozzle (to move in + near 130-at me it is an emphasis in a back wall), after wally segmentize at the beginning there is a G92 X0 Y0 Z0 E0 team (to nullify value of axes). bed in the top, there are teams further where Z all the timeby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
You can make short video? I not absolutely understand as to transform and start up Gcode from Repetier-Hostby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
If I correctly understood you, at the moment I can't start G code from Repetier-Host through USB? Only through Flash card? And what about Simpson? (your prize-winner) I too printed it. And too I want to start.by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Well here Weely is already printed. The mechanical part is already collected. I didn't find Bearing 6702, the next replacement 68012 - here outer diameter too 21мм, but internal 12мм therefore I changed hub screw to 12 mm (at me while it doesn't turn out to print a small carving and I turned hub screw on the lathe from polyamide).Начал to assemble electronics. @Nikolas is necessary now to me yby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
I made one more experiment. I increased quality of the press (a layer of 0,2 mm), but the most important that in Slic3r: Advansed: Resolution = 0. If this option =0 that Slic3r smoothes things over. Everything perfectly turned out. but it is necessary to correct an emery paper not much.by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Nicolas! You created an excellent thing! There is nothing ideal. Likely it it is possible and it is necessary to improve, but it absolutely another. And a set in the course of the press. And I thank, you, for that that, you do! To impart the knowledge, skills and experience by another, to create something for the benefit of mankind is a gift from God. Let It will be always with you. Forgive for mby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Nicolas! You to me recommended to make experiment - the press at the same time 2 with the different permission. Here result - edges are visible in both (it doesn't transfer a photo or it is necessary to choose a foreshortening) hands accurately feeling. However you are right, quality of the press forces both disks to grind an emery paper. Still it is necessary to be played with settings of a slayby Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
How these edges will influence press accuracy? Slayser and will make it. Perhaps in your CAD to the program to increase quality of drawing?by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
The super! ! ! You made it! ! ! Thanks! ! ! Your recommendations what filling, layer thickness? what scale? scale = 10?by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Tri-Polar Bot Concept -- Meet Wally - 12 years ago
Perhaps for you it not important and doesn't cost your attention! Yours the hand contains the WALLY logo. Why on "xy forearm " there is no logo? It after all too hand? I began the press, I think others too. While all didn't print - it is necessary to correct?by Vladimir_Lukashuk - Polar Machines, SCARA, Robot Arms
Re: Grounded Experimental Delta Printer - 12 years ago
that if a foot which on the right, to shift closer to the center. and back to move more to the right?by Vladimir_Lukashuk - Delta Machines
Re: Grounded Experimental Delta Printer - 12 years ago
In the one-color version it is similar to a Cyclops - the cripple, on 2 crutches. And tail for some reason sideways, or it not tail, and something else? It is necessary to create a logo in 3Dby Vladimir_Lukashuk - Delta Machines
Re: Grounded Experimental Delta Printer - 12 years ago
Hello, Nikolas! Since I saw and already Your Simpson printed, constantly I watch your works. This all outstanding. The logo of a crab very much is suitable for your design, it should be added on each detail of the printer and to extend with it. Forgive for my bad English.by Vladimir_Lukashuk - Delta Machines