Show all posts by user
Rostock, Kossel, Simpson, 3DR, and more. See: http://reprap.org/wiki/Category:Delta. Previously named "Delta Robots and Stewart Platform"
Re: 400mm round heatbed - 11 years ago
Thanks Doug. I contacted the supplier for full info and waiting for his reply I will post once received for powering i am planning to use automotive relay 30-40 amp to bypass my ramp regardsby LB-3D - Delta Machines
Re: 400mm round heatbed - 11 years ago
Hi all actually I am printing my new designed printer (TRUSS) with 550 mm actual bed print size when searching I found this, and planning to order its not in Europe as well but... hope this will help, or if someone have an advise Regardsby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! 
- 11 years ago
Dear friends First I want to thank you all for your support and for this Forum Special thanks for JOHANN, RICHRAP, ~Russ and ANDY CART. This is a fast log about my build and its capabilities for now (still improving) Supplier of my kit forget 1 pulley and the belt is short I find myself stack for 2 week until supplier send missing parts Once received – installed – ready – and I face homingby LB-3D - Delta Machines
Re: Rostock mini pro, problem with movements - 12 years ago
Hi welcome to an amazing world i faced same problem first time homing this is my post: in the 5th reply ANDY wrote: Your endstop configuration is working o.k although you seem to have your switches wired NO I.e they go closed circuit when you operate them. That's o.k though because you have the logic set to 'true'. The acid test is what happens when you send M119. As per your post all seemsby LB-3D - Delta Machines
Re: is their a 3d printer parts shop in GUANGZHOU?? - 12 years ago
Dear ekaggrat Thank you I sill have 10 days in guangzhou before traveling back I am planing to buy a complete set for a enlarged kossel Parts needed: soldered and assembled RAMPS 1.4 Iduino Mega 25605 soldered A4988 stepper driver heatsink for A49881 Reprap Ramps1.4 RRD Fan Extender LCD display for RAMPS 1.4 stepper motors Nema17 hotend Round heat bed Borosilicate glass 240mm radiuby LB-3D - Delta Machines
is their a 3d printer parts shop in GUANGZHOU?? - 12 years ago
Dear friends Anyone knows a shop or location in guangzhou where i can buy the parts for my new build? Many thanksby LB-3D - Delta Machines
Re: Rostock Build Log - 12 years ago
Dear jaguarking11 I saw your blog (nice one), and sorry for what happened, its a real pane that small things can delay a full project for your end-stops it seem to be the one i am using mine is geeetech clone which is mechanical end-stops v 1.2 exactly this one in this image 4 pin in the mechanical end-stops (without any mark) should connect to 3 pin in ramp 2 of them are (+) and (-) (scaryby LB-3D - Delta Machines
Re: Rostock Stepper Motor Problem - Help - 12 years ago
did you check if all jumper has metal inside? sometime they come without (faulty) i am not an expert but if you are sure its board problem and you can not ask for replacement then i think it is possible to use second extruder as y (for you) so we should ask experts how to adjust this in firmware regardsby LB-3D - Delta Machines
Re: Rostock Stepper Motor Problem - Help - 12 years ago
for me when i did not install jumpers on my ramps all motor did same noise did you check if there is damaged jumper under y stepper driver? regardsby LB-3D - Delta Machines
Re: Rostock Mini - Homing Issues (video) - 12 years ago
Mike glad that you got it homing (i can imagine how nice when first homing correctly ) BTW, how do I manually find the Z distance? i believe that for delta printer its slightly different as i know once homing this mean X = 0 bed center Y = 0 bed center Z= Distance between nozzle and print surface after homing (positive value) you should measure Distance between nozzle and print surface afteby LB-3D - Delta Machines
Re: Rostock Mini - Homing Issues (video) - 12 years ago
Dear Mike (i am not an expert but i'll try) first, is the marlin you'r using the latest one? i found many difference between what i have and urs (i dwl the latest for my delta) there is many things in ur config file and i think you should adjust first: #define TEMP_SENSOR_1 -1 if you dont have (thermocouple with AD595) change the value to 0 #define TEMP_SENSOR_1 0 second: you have #defineby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
Dear Mike hope that you will figure out whats wrong soon, and you can start enjoying yours once i get time i will try to give a hand (i am new to this ) keep us updated and take careby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
Dear Andy i tried to configured pronterface without any success still considering center of the bed as origin so i adjust slic3r and put a command in the starting of the G-code G1 X -100 Y -100 and it works maybe this is not the right way but at least i enjoined last night plotting with my printer with a pen (did't get my plastic yet ) Really its amazing i will retry to adjust pronterby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
Andy sure i will once mine get printing . i have a problem now my printer consider center of the bed as origin where should i adjust this?? don't know if its on marlin or pronterface or when generating g-code!!! thanksby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
HOOOOORAY!!!! ANDY U'R RIGHT - THANK YOU VERY MUCH - you saved me i didn't know that those jumper are related to stepper driver once installed - homing - and thats it homing very smoothly THANKS AGAIN /// imyz u'r right, first it's always showing on my lcd an error about temp so i connect my thermistor and hotend to my ramp (its ready why not to connect ) really thank you all for your supportby LB-3D - Delta Machines
Re: NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
daveb500 / imyz many thanks for your replies i tried REPETIER and face same exact problem i cleared EEPROM nothing change if i invert the logic of my endstops it seems the result not as expected ***SENDING M119 result :*** All endstops free: Reporting endstop status x_max: TRIGGERED y_max: TRIGGERED z_max: TRIGGERED in this case if i do homing all axes jump few mm and stop any suggestion thby LB-3D - Delta Machines
NEED HELP !!! ROSTOCK BUILD - WHATS WRONG !!! - 12 years ago
Dear Reprappers and experts My first post (not the last off Corse) Finished from my build of a standard rostock with original dimension (RAMP 1.4 - INDUINO MEGA 2560 – MECHANICAL ENDSTOPS V1.2 – A4988 STEPPER DRIVER – T2 BELT – 20 TOOTH ALU PULLEY – NEMA 17 STEPPER MOTOR) I download the latest marlin, adjust the value in (configuration.h) (configuration_adv.h) to match value of files insideby LB-3D - Delta Machines