Show all posts by user
Rostock, Kossel, Simpson, 3DR, and more. See: http://reprap.org/wiki/Category:Delta. Previously named "Delta Robots and Stewart Platform"
Re: Auto bed levelling doesn't probe the bed properly - 4 years ago
I've now done some more test work. If you use the extended Marlin G codes such as F,B,L, R etc to set the bedsize and margins then what I posted above happens.. If you just use G29 on its own it works...Is this a Bug?by jregholdsworth - Firmware - Marlin
Auto bed levelling doesn't probe the bed properly - 4 years ago
Ive built my own corexy machine with a 300 by 300 bed. It uses an inductive Z probe. all works as it should if the y limits are set so that the probe does not go past the y=255 in the probing sequence. The hot end homes to x-=0 y=0. The offset for the nozzle to probe is -45, -5, -1.7 i.e.probe to the front and left of the nozzle and I've got a 5mm margin set round the edge of the bed. The bed sby jregholdsworth - Firmware - Marlin
Re: Normal operation lights sequence - 6 years ago
Sorry should have looked at what I wrote Ive go the probe to work quite well...but could I just ask for confirmation of the LED sequence power on..red LED on ...blue LED off tap hot end..blue flashes..red goes out for 1 second or so is this normal operation?by jregholdsworth - General
Normal operation lights sequence - 6 years ago
Ive go the probe to work quite well...but could I just ask for confirmation of the LED sequence power on..red LED ...blue LED off tap hot end..blue flashes..red goes out for 1 second or so is this normal operation? regards JHby jregholdsworth - General
Re: Core XY Printer £100.00 Build Cost - 10 years ago
Feeling quite dull.,...you might live in the last of the summer wine territory but I is one...thanks anywayby jregholdsworth - Delta Machines
Re: Core XY Printer £100.00 Build Cost - 10 years ago
Interested but can't find where to source the igus bearings? can you give me any pointers?by jregholdsworth - Delta Machines