Well I think I just figured out my Y not homing right.... looks like it mashed down or moved the endstop and it was hitting and bouncing off a pin at the top of the rail and sometimes it would hit just right to activate the switch. Done messing with it tonight we will see what tomorrow brings. Did I mention I bought this on Craigs List... I guess I can expect stuff like that.by sgastel - Delta Machines
hoang82 Are you able to home the axis? I was messing around with the endstop invert and endstop dir (direction). When not configured right, the steppers stutters because you're telling it to do one thing but it's coded to do another. That sounds like exactly what is happening, can you explain how I would go about fixing this please? And I was wrong it was my "Y" that is having the problem nby sgastel - Delta Machines
Same problem here, the X kinda works but then seems to drag or go up and then drag then go. I have a new motor that will be here on Monday and if it performs the same then I know it is the board, I am either going to order up a new board or just go with a new set of generic electronics and go from there. I will post on Monday and let you know what happens.by sgastel - Delta Machines
I have the mks base board is there a special firmware for that particular one? and if there is can you point out which one? I really appreciate the help, I am excited to start printing.by sgastel - Delta Machines
Do you have a copy of the build instructions and the firmware you are using? I bought one on craigs list and I am trying to fix it.by sgastel - Delta Machines
Weird thing is in Pronterface when I hit +X then X is going down. -X and X goes up. If I hit +Y then Y goes up and -Y and Y goes down. Its as if X is backwards. Is there an easy way to flip the direction X goes?by sgastel - Delta Machines
I have tried moving stuff around just to test and whichever is the Z it has the problem... Z is about an an inch from the stops.by sgastel - Delta Machines
Have tried the MicromakeD1-HBK.hex and the MicromakeLegacy-HBK.hex and am getting the same results. Y and X seem to be fine but Z is stuttery and seems to be putting up a fight with buzzing.by sgastel - Delta Machines
Okay I feel pretty stupid as I am not able to figure this out. Just picked up this micromake on CL and I plugged it in and hit print, it all seemed to work fine. While checking out the software I hit install default firmware and all hell broke loose. When I try and get it to home it seems as if Z hangs or is reversed or something. So X and Y go right up to the top and hit the switches but Z doeby sgastel - Delta Machines