> Hi guys, > I am just about to strip my printer down and rebuild it with all the right angles this time. > I have got a digital angel finder and a good spirit level, can anyone give me some tips on the best way to achieve 3 x 60 degree corners and how to get the towers perfectly upright. > This time I want to build it right, with the angles all being correct because now all my printsby samlittlewood - Delta Machines
You can also buy the carbon fibre tube in ~1m lengths from various composite fabrication suppliers - Pultruded 4mm ID tube - often sold for kites.Cut carefully and avoid the carbon dust. (I use a dremel and a vacuum cleaner ).by samlittlewood - Delta Machines
Yeah - not good - that's why i switched to traxxas ends & carbon rods. EDIT - I was blaming geometry on effector tilt - but maybe it is all down to the rod ends interfering.by samlittlewood - Delta Machines
Got a SINTRON kit going with reasonable results: (More prints attached) The mechanics are pretty much as supplied, except for carbon rods & traxxas rod ends for arms. The electronics have been replaced with a Duet 0.85 - I knew I was going to do this - the Mega 2650 & RAMPS board are destined for a TinyG setup elsewhere. Notable things during build: - ALOT of fettling of the framby samlittlewood - Delta Machines