QuoteLVD Here’s the latest version of the FLSun firmware: G29 now takes some parameters to overrule the default settings in configuration.h: G29 P(number of grid Points, min 3 max 10) B(bed probable radius) G33 now probes multiple points as well (upto 12*3 + 6 centre points): use A to run autocalibration, without A is just checks if the calibration is OK. Beware in order to speed up things theby JanR - Delta Machines
Did you place smd Led light on the heat bed? Which one?by JanR - Delta Machines
How set up the heated bed in Configuration.h ? I ordered and received: * PCB Heatbed MK2Y 200 * MKS HOTBed MOS V0.1 * Temp sensor The temp sensor is not responding in Repetier, and its not possible to switch the heater on. And how did you mount the heatbed to the Delta Printer ? The heat bed plate is not really flat by itself. But I guess that when the glass plate is clamped on top of the hby JanR - Delta Machines
I'm using the firmware provided by FLSUN (ver 1.0.0). Arduino compiles it without any errors. The USB connection still isn't stable. The receive and send buffer (devicemanager) was on max (14 and 16) so that should be OK. I even tried lower buffer size but that didn't make things worse or better. Another thing I tried was to set the Windows priority of 'RepetierHost.exe' to 'High' or even 'by JanR - Delta Machines
I didn't set any USB buffer. Iwent back to the original FLSUN Marlin version again but de printer stalled within a minute of printing. I'm using Repetier-Host on a different computer but it still doens't work. I check for buffer settings and try again.by JanR - Delta Machines
The printer does not recognise the SD card. In what filesystem should it be formatted ?by JanR - Delta Machines
Thanks for the links to the parts on AliExpress. I allready ordered some parts How many amps does the heated bed need? The specs on Aliexpress won't tell and 360 Watts seems a lot. For now another issue pops up. My printer stops printing during longer prints. When I print the spoolholder for example, the printer stalls 2 times in 17 minutes. When I resume with the OK button in Repetier (in theby JanR - Delta Machines
Figured out that it is in Repertier - Config - Firmware EEPROM Configurationby JanR - Delta Machines
Is this done by sending code: * M666 X0.1 Y-0.3 Z0 * M500 to the printer with Repetier in manual mode ?by JanR - Delta Machines
Now the fan works fine. Thanks! Do you know how to use the M666 'delta endstop adjustment' Is this an M-code to be sent by a hosting program like Repetier or are the delta values being set in the Marlin firmware ?by JanR - Delta Machines
I have a question about the fanspeed. It seems not possible to adjust the fanspeed with the M106 Sxxx code or turning it of with the M107 code. I used Pronterface and the display settings of the FLSUN. I tried 3 types of firmware: * firmware provided by FLSUN (ver 1.0.0) * the firmware from LVD: Marlin 1.1.0-RC3-FLSUN-DELTA * and firmware Repetier 0.92-FLSUN-DELTA.zip I tried also the other coby JanR - Delta Machines