The following are what I have set. They are the defaults, but I actually did do the calculations to verify them. // // MOVEMENT SETTINGS // @section motion // // default settings // delta speeds must be the same on xyz #define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 94} // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_MAX_FEEDRATE {500, 500, 500, 25} // (mm/sby mdilling - Delta Machines
I have installed mine so that I can use adjuster nuts to level the bed. See Picture.by mdilling - Delta Machines
You will need to replace the stock Marlin Configuration.h and Configuration_adv.h with the delta files in the example_configurations folder. Then modify those to match your config. SJN is correct you can just modify the settings in the config file instead of re-wiring your hardware.by mdilling - Delta Machines
I have to agree with nebian, my printer is mostly upgrades. However, I never expected it to be anything else. At the price, I never expected it to be a $3000 printer. I just wanted something that would allow me to get my feet wet and allow me to learn about 3D printers. I believe that this was the perfect kit for my expectations.by mdilling - Delta Machines