Can I use d8 as fan control and have dual extruder?by MakersMic - RAMPS Electronics
I thought I had an original idea when I thought of two effector. I liked the idea and I'm going to ruin with it. You guys should check out my channelby MakersMic - Delta Machines
Just wondering if anyone has ever thought about using an e-ink display? And what it would take for me to get it to work. I know I would need to configure the firmware for it, by that meaning include the proper library for it and adjust some inputs. But is that simple? This just seems really appalling to me. Any thoughts would be appreciated. Thanksby MakersMic - Experimental and Hobby
I'm in the process of calibrating slicer setting on my custom built delta and while I am printing the effector pauses for split a split second and then resumes. I've read that my full graphics display really taxes the arduino. I'd like to disable the display in firmware. I've uncomment the line that defined the type of display and that has not made an effect on performance. Is there anythiby MakersMic - RAMPS Electronics
Lol. I got it folks. Had the wrong sensor defined....kicking myself.by MakersMic - RAMPS Electronics
I need some help troubleshooting my thermistor readings. I am consistently getting a reading of over 475. I'm using marlin firmware 1.1.0 and have tried swapping thermistor which doesn't make any difference. Is there a setting in config.h that I need to modify?by MakersMic - RAMPS Electronics
I successfully lengthened the cables by 2.5 feet. No issues yet.....by MakersMic - RAMPS Electronics
Group, would there be any issue with the display communicating with the display of I wanted to extend the cables that connect the two? Currently they are about nine inches long and I would like to extend to about five feet. I know it's long but that's the goal.by MakersMic - RAMPS Electronics
Dc42, I was thinking the same for a little bit but when I check it manually I don't feel all that much friction. I know a person can up the voltage using the pots on the drivers, does that increase amperage too when adjusted? Forgive me, dealing with electricity is not my strong side.by MakersMic - Delta Machines
First thanks for reading my post. My setup its this. Scratch built delta using ramps 1.4, with the latest marlin. My problem is this, when I use pronterface or repetier host to home the z axis only 1 or 2 of the carriages go all the way up to trigger the endstops. When this happens on the 1 or 2 that carriages that stop short I can hear the steppers making a humming noise. And then after aboby MakersMic - Delta Machines