--SOLVED--by Glx463 - Delta Machines
Hi, I also have a Delta and I also use Marlin 1.1.9.1. I'm new in the world of 3d printing but made a lot of progress by myself. "modify them as they do not integrate the minimum of delta setting...." Did you tried to use the provided file (congif+adv.h) from Marlin that are already "mostly" preconfigured for Delta printer ? You can find them in the "exemple" folder--> Delta-->(the modby Glx463 - Delta Machines
Hi everyone who will take their time to read and (maybe) give me some advice... To facilitate your understanding of my problem, I'll explain the step I went through, then follow with my printer behavior... 1) I set a random height in Marlin, upload it in Ramps, then hit "initialize" in the LCD menu to implement the now data. 2) From Repetier-Host, I connect, I "home". 3) The printer raise to hoby Glx463 - Delta Machines
Hi again, Yes, after multiple tried and error, I finally get everything clean and square. And to answer your question, Yes, after every modifications I did in the config.h I had to "initialize EEPROM" from the LCD screen and "load", but I think that by initializing, it delete the over-ride and push the new data at the same time, so maybe loading after initializing may be useless... Anyway, probby Glx463 - Delta Machines
Hi thehankinator, thanks for the reply. Yes, I did changed the DELTA_RADIUS after I acquired all the data from an auto leveling. <-Height, Ex, Ey, Ez, DELTA_RADIUS, Tx, Ty, Tz, DIAG_ROD) The problem persist tho. I still have a 0,12-ish difference, even after an auto calibration session. By the way, When I auto calibrate, the probe offset isn't considered, do you know why ? In all case sceby Glx463 - Delta Machines
Hi everyone, I made good progress since my last post. I manually leveled my bed and realize something wrong. My bed is a flat sheet of glass but when I manually probe the Z_MIN, it's like if my bed was convexe on xy, xz and yz. Same as if my bed was a bowl. The difference is minimal, it’s 0,15 but it enough for a sheet of paper to be low-friction in the each corner, hard friction on axis and imby Glx463 - Delta Machines
Here is the change I did in the configuration.h, now the LCD is working. If you want to suggest me better setting feel free to add an input ! line#..... variable......input 125 BAUDRATE 250000 132 MOTHERBOARD BOARD_RAMPS_14_EFB 234 #define POWER_SUPPLY 1 ---Thermal settings--- 306 #define TEMPS_SENSOR_0by Glx463 - Delta Machines
Hi everyone, I hope you're doing well !! As mentioned in the title, I'm new to the world of 3d printing. In the following, I'll list the part I used to build my delta printer (if it help you to help me). In the mean time, here is the problem I face that I can't resolve... —-SOLVED—- I fully assembled the delta printer and 3x checked my connections. For now, no smoke, so it's good sign!! lol Tby Glx463 - Delta Machines