Sorry, I did this by mistake.by okkie - Printrun/Pronterface
I bought a "all metal hotend". It is an Hexacon hotend D175 on RepRapteile.de So it's exist. I used different hotends and this is the most sucessfull hotend. Still id o have some questions What is the calibration for repsnapper or kisslicer for the minikossel?by okkie - Delta Machines
Hi Eric, hoe bereken je dat? Ik ben zeer benieuwd. Okkie.by okkie - Dutch User Group - Archive
Hello all, I am having the RAMPS 1.4 and Arduino 2560 running with the reprap discount smart controler. After several days experimental the thing works, hurray! There is only one minor thing, the BED is not heating. even when I give the order to preheat ABS. The BED is still cold. In pins.h there are several BED commands. Any body who nows about the commands to heat the BED or what are the Voltsby okkie - Reprappers
HalloThijs, I do have the same problem and I found a schematic of the LCD and the connecting to the mega 2560. The drawing is an arduino uno but the setting is the same as in the 2560. Starting your aduino Sketch you must first look to the Extra-menu, Board (chose here the Mega 2560. Then Serial Port and chose here ACM0 or whatever you USB is calling. Now go to menu File and chose example. Hereiby okkie - Controllers