Just received my 12v mk3 heated bed.I was going to use a xbox 360 power supply to power it,Do I just connect the xbox supply on the second lot of power input connections and leave my existing 6a power supply still connected.by mrorange26 - Delta Machines
Received my new E3D clone today,All together just got to install it in my printer and calibrate.by mrorange26 - Delta Machines
Ok thanks.I printed it in pla as long as it's cooled ok.it shouldn't warp or should I get it in abs.by mrorange26 - Delta Machines
So will have to run another pair of cables for the all metal hot end as currently my fan goes on and offby mrorange26 - Delta Machines
I printed 210c pla 80% infill 0.2 mm .came out fine.if you pm me email I can send you a picture of it.by mrorange26 - Delta Machines
Do you need a fan for the alu fins and also a separate one to blow onto the plastic as it comes out.by mrorange26 - Delta Machines
First part done.Bits ordered.by mrorange26 - Delta Machines
Thanks how did you mount the fan to it.by mrorange26 - Delta Machines
I will have to get some alu tube aswell then.by mrorange26 - Delta Machines
Also can you post a picture of it completely setup thanks.by mrorange26 - Delta Machines
What do you use to attach the fan to it.by mrorange26 - Delta Machines
Will that fit on the standard cherry pi lll mount.by mrorange26 - Delta Machines
Hi Andy what all metal hotend do you use and do you have a modified holder for it .by mrorange26 - Delta Machines
I am using a fan but still not hardening fast enough so I done it your way and worked fine.Thanksby mrorange26 - General
Im having trouble whenever I try print a small cylinder at the end of a particular print it goes all messed up,Picture attached. Im using a cherry pi running PLA and cura to slice.by mrorange26 - General
I received my cherry pi lll a few weeks ago and still playing with settings.Im impressed with its speed and quality.Andy has been very helpful with settings etc.Here are a few things I have printed,I still need to fine tune it. I think the owl was at 0.2 and vase at 0.3 layer height.by mrorange26 - Delta Machines
Could someone run through the settings for cura so I can get my cherry pi lll to print.What printer do I pick on the wizard etc.I have done it once already and the current print job will goto about 50% then the filament feeder starts going backwards then forwards and messes the print up. ALso now anything I put into cura then transfer to sd makes the printer goto back right corner and motor keepby mrorange26 - Delta Machines
Could someone run through the settings for cura so I can get my cherry pi lll to print.What printer do I pick on the wizard etc.I have done it once already and the current print job will goto about 50% then the filament feeder starts going backwards then forwards and messes the print up. ALso now anything I put into cura then transfer to sd makes the printer goto back right corner and motor keepsby mrorange26 - Delta Machines
Hi I am totally new to 3d printers and have recently bought a cherry pi I cannot get it to stick to bed I think it needs calibrating.How to I start a G30A command?by mrorange26 - Delta Machines