I still don't get it. Does it makes any difference to the print quality if the molten filament is 0.1by sid - Mechanics
funny... I just asked (in the german forums) something similar I thought about hacking a desoldering gun i found on ebay. hollow barrel interchangeable tips (smalles 0.8mm unfortunately) max temp 450by sid - Mechanics
Der Einwegspritzen extruder von fab@home sieht doch ganz plausibel aus fby sid - Altes Forum
I'm sorry, maybe I'm lost in translation.. a slug... isn't that a "homeless" snail? 32.2lbs ? that'd be a pretty huge one uh wait.. here we go... thanks to dict.leo Now I get it, its a piece of metall, who'd known thanks for lighting things up Forrest. 'sid No matter what it's strange to measure the power of a stepper in kg/m or slug/ft cause that's not a constant, not even on earth! nevermby sid - General
Jupp, hab ich auch gesehen, die 30m Rolle zu 9,irgendwas Euro... sieht garnicht aus wie 30m das kleine Dingen aber um ehrlich zu sein, ich schrecke weniger wegen des Heizdrahtes zurby sid - Altes Forum
Well, i just made a small barrel of that pyrozitur I bought the other day from the first imression it's pretty useless. When fully cured it's getting light grey, but it's extremely brittle, depending on wallsize you can smash it with two fingers. also it's conductive at least sometimes... hard to explain; whenn I touch it with the multimetre it shows nothing (that is more than 2000 kOhm) but whby sid - Plastic Extruder Working Group
Hi, ich hab grad son bisserl bei ebay gebummelt und da ist mit eine Entlby sid - Altes Forum
well maybe it's more a time measure than distance, just like lightyears measure the distance not the time... how long does it take for a slug to move one foot... Or its how many slugs fit in a foot what may depend on shoesize (what a bizarre imagination , i'm sorry for that.. btw it's 32 for sz 9.5 ) Well it may be just some oldschool babelfish translation error (p.e. hahnsauger is one translaby sid - General
Hi Andreas; skeinforge you can find here: 'sidby sid - RepRap Host
as dan mentioned above: an position encoder QuoteSomething else you may notice on the vid is mounted on the block of wood to the left is a potentiometer with 3 wires coming out of it. This rotates according to the Y axis's position. This cost $1 to hack up and so far I have it so that I can set the Y axis either north or south of a desired value and it will auto adjust back to the specified coordby sid - Reprappers
check here: hdpe filament is available in 3mm spools still searching for abs though 'sidby sid - Reprappers
facile simone, prendi il "FULL mechanical Kit -Silver" di bitsfrombytes.co.uk e il "complete arduino electronics kit" di store.rrrf.org ecco tutto 'sidby sid - Discussioni generali - NO PROBLEMI DELLA STAMPANTE
true forrest but in fact there is no answer on that one, because printspeed and accuracy a far beyond being a static value for each and every machine out there. Not talking about the raw material prices David: You'd better go for a bitsandbytes kit, I guess. 'sidby sid - General
strip /1+(31).JPG ! just open the "folder" it'll open the file itself. 'sidby sid - Mechanics
65 ?? I'm in! please let me know the shipping rates to germany. 'sid ps please contact via PN for the necessary informationsby sid - For Sale
does that make any difference? other than the side it hit against? 'sidby sid - Controllers
at least that's what is written to it, yes. Wasn't the mythbusters measuring those spindels once ? I can't remember really 'sidby sid - Controllers
certainly some sort of "i was a stone or crystal once" Could not find any information about that stuff. But no it does not smell, not even a bit. Not like concrete nor plaster (well.. plaster doesn't smell alot either...my nose okay? *sigh*) Well in fact there is nothing written on it, nothing I can find on the net, nothing.. a mystery, that bottle doesn't even exist I'll see next week I guesby sid - Plastic Extruder Working Group
epoxy is not enamel and yes what do I know about reinforcemnt of buildings... just spend six years at the university with architecture... go ahead, I'm bored 'sidby sid - Plastic Extruder Working Group
encoded dc motors are just like servos, not? Servos are way harder to control than steppers. Even though servos are usually cheaper than steppers, the set of controller+motor is cheaper for steppers (as far as I'm aware of) 'sidby sid - Controllers
Salut Viktor, mudlike yes, white.. unfortunately not, it's mousegrey (that's what is written on the pot... honestly) maybe just some sort of plaster. 'sid toom wenn Du dir das mal aus der Nby sid - Plastic Extruder Working Group
Just got from the local hardwarestore I got me a small pot (200grams) pyrozitur, I never heard of before, but its temperature resitance is up to 1100by sid - Plastic Extruder Working Group
Well, but reinforcement of concrete should prevent cracks, otherwise its pretty useless. If you're going to use steel, you need to have it attached firmly to the concrete, that is rust or bust A certain amount of rust is needed, another allowed above that the steel bar is useless, true... still rust is a must *gg* And Nope, "construction guys" LOVE rust on the concrete reinforcement. it's therby sid - Plastic Extruder Working Group
Make sure you use rusty wire. Concrete is somewhat ironophobic so it won't stick to the wire if the wire isn't rusty That's why the reinforcement steel is always rusty at building constructions. 'sidby sid - Plastic Extruder Working Group
okay, say we have a pattern of dots. Designer: Rodrigo Phantasmo the first (RPI.) item: Very cool unit (VCU) and a Serial Number (#237) Nevermind how the pattern looks like, but let's estimate .:..: :...: .::.: Now, here comes the "bad replicator of valuable items" He does an exact copy of Rodrigo's Masterpiece and he adds exactly the same pattern to his just made falsification .:..: :...: .::by sid - General
Ian, if it helps I can (at the end of next week) try to recode some rawfiles to proper flvs. So if you want me to try, maybe you can upload the rawmaterial to a filehost of your choice (rapidshare or similar) and link it from there. I'm going on vacation tomorrow, so I cannot be faster than that. 'sidby sid - Reprappers
I think the problem is: getting that *beep* java running on the windows box. That's why there's the need for the livecd, (cannot think of another reason at the moment) switching to the gcode commandline tool is easier to do on a windowsbox (for windowsians at least) So gcode--> no live cd needed --> no graphic problems 'sidby sid - RepRap Host
Also aku hat soweit ich sehen kann NUR 3mm schweissdraht, allerdings kein ABS (oder ich hab's noch nciht gefunden) Gehr hat auch PE draht in 3mm ; Gehr bietet ausserdem sonderfertigung von ABS Platten an, vielleicht wenn man nett fragt auch Schweissdraht 'sidby sid - Altes Forum