Show all posts by user
Rostock, Kossel, Simpson, 3DR, and more. See: http://reprap.org/wiki/Category:Delta. Previously named "Delta Robots and Stewart Platform"
Re: Kossel Delta xxl build project HELP - 5 years ago
Thank you so much. I just got home. I will do the print tonight. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I got the bearings yesterday night and fixed my printer. Thank you so much. I also print the mount-plate and the bearing-holder . The m3 screws fit perfectly. Please take a look at the attached pictures. Can you please move the corner wings inside the vertice or I don't know, somewhere else, to have the mount plate sit down on the vertices ? I'm waiting for the bearings and the belts. I got theby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Ok. Thank you for clarifying.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Can you please double check the design. From my understanding it is for the bottom vertices. The mount plate under the bearing-holder it will fit on the top vertices ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Thank you. I placed the order for parts.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
From where did you get your belts ? There are plenty on Amazon and eBay but nobody knows about quality. Witch is better glass reinforced or steel in it ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Thank you so much. I really appreciate your help. I will print the parts after I will receive the bearings from you. I will place the order today from the links you provide. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Ok, I will. In the meantime I will do the e-steps calibration. Thank you. Send me the invoice to pay for them.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Thank you so much. The set up what you have is much stronger than the Robotdigg. I will place the order today for the parts.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Do you have only the flanged bearings ? If you have the other parts from vxb.com and servocity, I need them too because I want to change my set up . Do you think the bearings from vxb.com they are fitting my corners ? If not what changes I have to do in order to use them ?Thank you. Please send them.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I was trying in this morning to print the model from the Triffid Hunter's Calibration Guide , just to see the difference before and after the e-step calibration but the bearings from one pulley stop working. Do you know if the hardware store has this kind of pulley. The printer is not working now.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I will try to print the extruder but I don't think the parts will be accurate enough. We will see. From where you got the shaft for your pulley, what bearings you use ? If is possible I will change my pulleys set up. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I sliced this model with Prusa Slicer. Something is not right. The top surface is rough and full of dots/ blobs. Witch settings I have to change to get a better print ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
What did you mean by : I'd want to say print out another extruder and test it out to see if that takes care of the issue.What kind of extruder you are talking about ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I took apart one pulley and there is small play on the bearings for now. For sure it will not get better. What parts did you use and what is your set up for it ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Do you think this could be because of the idler pulley ? I'm talking about the lanes on the bottom of the modelby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I will take it apart and check the bearing to see. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Last night I heard clicking noise from the printer and I checked from where is coming. The noise is coming from the idler pulley from the top tower. Do you think I have the belts to tigh or the bearings are going bad ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I uninstalled the Prusa Slicer and install it again and now the blower fan it is working good. I found on forums that is a bug in Prusa Slicer and they are going to fix it in the next update. I have to the end of my config.g : M207 command.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I start one print using PrusaSlicer but during the print the fan blower is stop working. I have to turn it on manual but in couple minutes is off again. I have the blower fan set up to 100% after 2 layers. Is this happened to you ? I sliced with S3d an print the model properly. I checked the plug and the wires and everything is okby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Long time ago I did notice the same squeaky noise and when I checked the magballs I found the same black powder what you are talking about and just one of those magballs had the chrome coating wearing away. I went on Amazon and bought this based on Hayden Huntley recommendation . I don't think is working for me. This stuff is like a Wax. After few hours I checked the magballs and the rod endby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
This is what I have in my End G-code : M104 S0 ;turn off extruder M140 S0 ;turn off bed G0 X0 Y0 Z460 F1800 ;home axes-5mm M106 S0 ;turn off cooling fan Should I keep the M400 ; wait for buffer to empty I changed all the Extrusions widths to 0.45by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Thank you Darrel. I'm planning to do the settings today when I got home. I'm going to change tonight the 0.5 nozzle with the new one 0.4 nozzle . I checked the details for delivery and the package is in front of my house waiting for me. I also ordered a Hemera 40mm fan to replace my blower fan to see if make any difference. If you are still interested in Tusk I found the tubes at Ace hardware :by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
Happy Easter. I have V 2.2 also. Can you send me your profile to start using Prusa Slicer. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
What version of prusa slicer you have ? V 2.2 ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
I did modified the 270 degrees fan duct and this is the result. This is the best print.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
There is one : User name : Juggeli I'm looking right now for the link from Thingiverse.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 5 years ago
There is another set up like this on Thingiverse with 2X4010 fans. Did you see it ?by alex773 - Delta Machines