Show all posts by user
Rostock, Kossel, Simpson, 3DR, and more. See: http://reprap.org/wiki/Category:Delta. Previously named "Delta Robots and Stewart Platform"
Re: Kossel Delta xxl build project HELP - 6 years ago
That's a very good news. Thank you FA-MAS. Do I have to change or save something in bed.g. Config.g ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
This is the the first Mesh Grid Heightmap with the Bed and Hotend off.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I have a deviation before 0.028 after 0.025 Should I be worry about this difference ? What should I do next ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you so much FA-MAS. It is working.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you so much David. It is working. I love this machine. I'm so close to print with it.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you so much. I did change per your instructions and it is working. Can you please help me to set it up for 6 factors with at least 18 probe points. I'm so happy. Is moving.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you so much. IT IS WORKINGGGGGGG. How I can change the probing from 100mm to the maximum radius ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I'm going to try again and I will report back. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
All buttons are doing what you said.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I removed the G28 from the bed.g. The T parameter in M558 is T6000by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Config.g ; Configuration file for Duet WiFi (firmware version 1.21) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v2 on Sat Mar 30 2019 20:58:40 GMT-0500 (Central Daylight Time) ; General preferences G90 ; Send absolute coordinates... M83 ; ...but relative extruder moves M6by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Bed.g ; bed.g ; called to perform automatic delta calibration via G32 ; ; generated by RepRapFirmware Configuration Tool v2 on Sat Mar 30 2019 20:58:40 GMT-0500 (Central Daylight Time) M561 ; clear any bed transform G28 ; home all towers ; Probe the bed at 3 peripheral and 0 halfway points, and perform 3-factor auto compensation ; Before running this, you should have set up your Z-probe triggerby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Something it is not right. I powered up the printer on,I homed it with G28 command, moved the nozzle up to 5mm above the bed then I ran G30 with no parameters, then I ran G32 command for Autocalibration. When I ran the G32 command the head went up to home all position then when it went down it crashed on the bed and moved towards the bottom of the Y tower. This was what I had in Config.g for Zby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you FA-MAS. I'm going to do that tonight and report backby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
For the second test I heated up the Bed to 90 degrees C and the Hot end to 205 degrees C and I used the paper only before I sent the command G92 Z0 . Please see the attachment for results. What is the correct value from test one or test two results that I need to add it to the config.g in G31 commend ? Thank you in advance.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I heat up the Bed to 90 degrees C and the Hot end to 205 degrees C and I did the Test and Calibrate the Z probe. For the first test I left a sheet of paper on the bed for all the measurements . Please see the attachment for results.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
FA-MAS, I changed the S parameter and now the fan is off when I turn on the printer. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you FA-MAS. I will change the S parameter tonight and will let you know.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I think I have a problem with the Print Fan. When I turn the printer ON , the print fan is on. Is this normal ? The Tool Fan and Fan 0 are at 30% This is the config.g right now for Fans : ; Fans M106 P0 S0.3 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off M106 P1 S1 I0 F500 H1 T45 ; Set fan 1 value, PWM sby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
This is the config.g right now for Heaters : ; Heaters M307 H0 B0 S1.00 ; Disable bang-bang mode for the bed heater and set PWM limit M307 H0 A278.0 C1612.7 D19.6 V24.2 B0 M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0 M143 H0 S120 ; Set temperature limit for heater 0 to 120C M307 H1 A635.2 C343.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David. I'm going to work on this todayby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David. I'm so happy because I'm done with the PID. What is the best way to test and calibrate the Z probe ? Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Do I have to change something for the bed heater ?by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David. I changed the H with M.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I run M303 H0 with no P parameter for the bed heater. Please see the attachment for results. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David This is the config.g right now : ; Heaters M307 H0 B0 S1.00 ; Disable bang-bang mode for the bed heater and set PWM limit M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0 M143 H0 S120 ; Set temperature limit for heater 0 to 120C H307 H1 A635.2 C343.6 D4.4 V24.2 B0 M305 P1 X200by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David This is what I have in Config.g right now: ; Heaters M307 H0 B0 S1.00 ; Disable bang-bang mode for the bed heater and set PWM limit M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0 M143 H0 S120 ; Set temperature limit for heater 0 to 120C M305 P1 X200 ; Cby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you David for your input. I run M303 H1 with no P parameter. Please see the attachment for results.by alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
I run the PID Autotune with P0.5 and P0.6 : Auto tune cancelled because target temperature was not reached. Then I run it with P0.7 and P0.8 . Please see the attachment for results. Thank youby alex773 - Delta Machines
Re: Kossel Delta xxl build project HELP - 6 years ago
Thank you FA-MAS. I will run it tonight and post the results.by alex773 - Delta Machines