Hey guys, this should be in the correct topic but if not feel free to move it. So, ive been printing PLA for over a year now, simply because i have always had trouble with other materials. While shopping my local source for some filament, i came across some really really cheap madesolid vorex resin. Apperently SLA printing isnt big near me, but i couldnt resist. Because i dont have the time toby Tukr - Polymer Working Group
Those will help me alot once i have selected a driver. Thank you. But im still in need of a driver, I would prefer to keep this as cheap as possible. Right now i have no machine to test this on, im still in the process of buying parts. Do you suggest any specific diode drivers? Ttl or analog? Current limit? Specific brand or model? I have no idea what to purchase.by Tukr - Laser Cutter Working Group
Ok, ill try to keep this short and understandable. I plan on making a laser device, using ramps 1.4. Ive built a reprap using it and understand what will need to change where for my own customization. My question is what type of laser diode driver will i need to utilize the 12v pwm output of D9. Im having trouble finding a diode driver that can use the 12v pwm input. I suppose one that uses aby Tukr - Laser Cutter Working Group
Just realized this is in the wrong topic. Disregard.by Tukr - Firmware - mainstream and related support
Ok, ill try to keep this short and understandable. I plan on making a laser device, using ramps 1.4. Ive built a reprap using it and understand what will need to change where for my own customization. My question is what type of laser diode driver will i need to utilize the 12v pwm output of D9. Im having trouble finding a diode driver that can use the 12v pwm input. I suppose one that uses aby Tukr - Firmware - mainstream and related support
It appears that was the solution. Somewhere along the line during this setup up i may have mistaken the term repetier firmware for repetier host, or it may have not been that specific. Is this a bug in repetier/Slic3r though? Shouldn't I be able to set an offset in slicer and not have prints become partially flawed?by Tukr - Repetier
Im going to try and remove the Z offset in slic3r settings and add it to my firmware setting. If i remove the z offset in slic3r my print previews move back onto the build plane. will update on how it goes. Is this possibly a bug within Repetier/Slic3r? Can somebody else verify in their settings?by Tukr - Repetier
So Ive enabled auto bed leveling and have set my offset for Z probe within the slicer settings. Im using marlin Firmware with ramps 1.4. If you see the attached screen shots, you can see a normal model before slicing, but after slicing it drops the print below the print bed. This does not cause a print head crash, rather it skips those layers, In this particular model 49 of them, And it reflectsby Tukr - Repetier