Давайте пишите цены и мнимальный заказby xoid - Russia RepRap User Group
Usually if you want 3d print you get 3 motors for X, Y, Z axis. In polar bot, it is the same. 3 motors mean a 3 drivers, pins of MC etc. But I can offer 2 motors 3d printing by polar arm bot. This bot has no Z axis, only X and Y arms . 1 and 2 are treaded rods To make Z movement (up or down) X or/and Y arms JUST DO ONE FULL TURN and thus move up or down at one thread step. The usual X-Y movemby xoid - Polar Machines, SCARA, Robot Arms
You are right , but using 4 arduino pins per motor is а little generously Could you please present a scheme you use? I can't uderstand how you control "upper" 12-v transistors by Arduino TTL.by xoid - General
Indeed, this "USB interfaces" are microcontollers itself, and are very like an Arduino. Yes, this is just another way to do it. Non-standart, sorry to say.by xoid - General
> of a belt to make it into a loop? You need no full loop. In cnc, belt never goes so far. Just use wire spring to connect start with end.by xoid - Mechanics
I belive thereis no difference in wax and any plastic in case of bronse casting.by xoid - General
L29Ah Wrote: > Ящитаю, бессмысленно юзать > тут двигатели постоянного > тока без обратной связи - да, конечно, будут энкодеры. Купил механические, если рассыплются, буду колхозить оптические. > вручить пару маломощных > шаговиков, либо энкодерных > лент и оптодатчиков от > струйных принтеров, если уж Я московское. Оптодатчики интересуют. Линейный оптический энкодер - моя мby xoid - Russia RepRap User Group
нейлоновый корд для газонокосилок. Репраповцы пробовали, говорят застревает. Нужен более горячий экструдер.by xoid - Russia RepRap User Group
Я начал сборку механической части (сделал верхнюю тележку ), также купил Ардуино и научился управлять с его помощью двигателем постоянного тока. Подхожу творчески, поэтому изобретаю грабли. Буду использовать threaded rod (шпильку с резьбой) и электродвигатели от жигулей - на степеры пока душит жаба. Неплохо программирую на С и читаю по английски, могу перевести какие-то трудные места. Рад будуby xoid - Russia RepRap User Group
First thing you could print is a small handy reel machine to make coils.by xoid - Stepper Motors, Servo Motors, DC Motors
you can avoid using magnets . you can avoud using any steel or ferro. The price is bad torque. All you neeed is (copper) wire and plastic (printable) frames. It is good idea to make one! Rotor and stator will both consist of wire coils. Wire on plastic frame. That is all. So we need brushes to power rotor. Brushes may be commutating (usual DC) or not commutating (just two rings) - but at thisby xoid - Stepper Motors, Servo Motors, DC Motors
Maybe to start with heated bed it is enought to put some pill-sized candles under a bed. No extra power used, it is env. friendly! Another way is to put all machine to termobox. Extruder, motors and other heat-emitting parts will heat all the box! Silence is a good side effect.by xoid - General