Das mit dem abschleifen ist eine super Idee, das werde ich auch mal probieren. Das Staub Problem könnte man mit einer Absaugeinrichtung lösen: Lüfter umkehren und eine Umhüllung des Schleifraums. Dahinter dann ein Staubsauger. Vielleicht könnte man ja auch eine Aluplatte plan schleifen, oder polieren.by JoergS5 - Druck- und Heizbetten
QuoteAlterBastler Die Längenänderung liegt aber im 1/1000-Bereich, auf 30cm sind es 1,7‰. Herzl. Grüße Die Längenänderung finde ich sowieso nicht schlimm, die kann man ja in der Software für den Stepper korrigieren. Wichtig ist, dass die Änderung konstant bleibt, und das ist ja gegeben, solange der Winkel auf der Welle gleich bleibt und die Fäden sich nicht kreuzen oder aufeinander stapeln. Grby JoergS5 - Mechanik
For guide pulleys for FireLine: mill a notch in the ball bearing with a lathe. This should be a small solution without additional guides.by JoergS5 - Mechanics
For the problem winding the fireline and fixing I thought, you could use a relative long aluminium tube, fix the line and then move it in z direction depending on the position needed to make sure the line is not crossing. If the line is moving independent x or y axis, like in dualwire-gantry, you should be able to link the positions directly to the stepper. I would rotate the tube a little bit toby JoergS5 - Mechanics