Show all posts by user

Re: Help with some problems! - 10 years ago

1 Cooling Fan is needed for PLA printing. 2 Check your model.The upper looks good while bottom is bad. Sometimes, it is related with the model design. 3 Lower the nozzle temperature and have another try.

by ecoreprap - Printing

Re: PLA not sticking - 10 years ago

Usually we stick masking tape to the glass, then set hot bed 50-70 degree.

by ecoreprap - Printing

Re: Can we use Injection ABS resin? - 11 years ago

For ABS filament, there shall be no moisture if the filament are put into oven at 40-45 degree C for 1-1.5hours,based on our experience.

by ecoreprap - Plastic Extruder Working Group

Re: Want to buy PLA 1.75mm filament - 11 years ago

Hello We have both 1.75mm and 3.00mm. 3D printing filament from Shenzhen. My skype ecoreprap reasonable price with good quality

by ecoreprap - Singapore RUG

Re: Halbe Rolle TPE Filament - 11 years ago

Hello We have TPE(TPU) rubber plastic filament, both 1.75mm and 3.00mm are available. My skype ecoreprap

by ecoreprap - Schwarzes Brett

Re: What's the coolest RepRap Project Going on Now - 11 years ago

Heard that there is a project in Netherland which print house now!Awesome!

by ecoreprap - General

Re: Bought PLA - not vacuum-packed - should I send it back? - 11 years ago

There shall be no BIG problem for PLA filament. We have printers here,the PLA filament exposed for about 1 year, it prints still good. If,I say IF, you found the printing not good you may dry the PLA filament by yourself. 1) Woven 35 degrees for 30mins 2) Try hair dryer. For ABS,please always keep it dry!

by ecoreprap - General

Re: I am a new one for the 3D printer. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me? - 11 years ago

Better send you the attachment.

by ecoreprap - Plastic Extruder Working Group

Re: I am a new one for the 3D printer. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me? - 11 years ago

Quoteyyiiwei I am a new one for the 3D printer. Our printer is used to print electronic components. I am looking for the conductive material, and the material could use 3mm Extruder, do you have some suggestion? Could you help me? Hi Currently when we talking about conductive filament, we mean ABS filament. See the conductive ABS information below. Can it meet your requirement? Properties Test

by ecoreprap - Plastic Extruder Working Group

Re: White PLA turns dark and nasty. - 11 years ago

For our PLA filament, the print temperature from 180-220 degree is normal,because temperature differs with different printers.For our filament on Makerbot,Ulimaker,Makerpi, it is ok to print at 190,but for another China brand, it needs 230. Which color do you print before the white one? There maybe some remains inside the extruder. Black is not easy to flow completely. Another possibility is th

by ecoreprap - Printing

Re: ABS Print - 11 years ago

For ABS filament, 230-250 degree is normal, I think.

by ecoreprap - Printing

Re: Joining last bits of filament together? - 11 years ago

Can anyone post a photo to show us? It is interesting.

by ecoreprap - General

Re: PLA Filament suppliers UAE? - 11 years ago

China is the factory for the world. Many people think goods from China are with bad quality and cheap price. That's not the whole story. There is factory in China who put quality first,treasure their reputation very much. You can contact me for filament analucia@ecoreprap.com We have sold to mor

by ecoreprap - General

Re: Universal 3D printing filament spool standard 2014 - 11 years ago

You can see the winding machine attached.

by ecoreprap - Printing

Re: Universal 3D printing filament spool standard 2014 - 11 years ago

If there is universal 3d printing filament spool standard, it will be awesome But I really doubt its feasibility. 1 Different 3d printers uses different spools. For example, the spool which suit Makerbot does not suit PICASO. The spool is installed inside of Picaso 3d printer,which has a very strict on the width of the spool.Any one over 65mm is not suitable.As far as I learned, there is another

by ecoreprap - Printing

Re: Filament breaks between use - 11 years ago

About filament breaks between use: This is all based on our customer feedback. We seldom get complains about 1.75mm. But last week, one Australia customer said PLA white 3mm get the same issue. 1) PLA is not very flexible, no matter it is Natural Work, or Hisun. Sometimes, too much pigment may make PLA more brittle. 2) The diameter of the spool whole is also very important. If it is too small,

by ecoreprap - Reprappers

Re: Fabber-parts.de - 12 years ago

If any one can give me a chance, I want to give best filament and best service to you.

by ecoreprap - Offtopic

Re: Fabber-parts.de - 12 years ago

Hi guys, really sorry that I can not write Germany and by google, I happen to know what you are talking about. Well, first I want to say sorry that China sellers give your guys bad impression. I have been in oversea trade for more than 5 years and I truely understand you that it is not easy to find one good supplier in China. But that does not really mean China has good supplier. To do business w

by ecoreprap - Offtopic

Re: color filiment - 12 years ago

Based on our selling experience, black,white and natural color are the best sellers. Seldom get bad feedback about specific color, but indeed there may need some small adjustment for the 3d printers for some colors. Our filament works good with Makerbot,Ultimaker,Felix and etc.

by ecoreprap - General

Re: Buying through Aliexpress? - 12 years ago

AliExpress is not so friendly,one reason is that they charge 5% for the seller the other is that the logistic is very slow.

by ecoreprap - General

Re: Dissolving PLA using Lactic Acid - 12 years ago

I do not think PLA can dissolve in the lactic acid.But do believe that PLA filament can dissolve in Chloroform.

by ecoreprap - General

Re: Choosing PLA Filament - 12 years ago

Regarding the PLA filament, I got some points to make. 1 There are some printer which using special filament. For example UP filament, the PLA filament in the market usually does not fit UP.UP printer is the one I know,but there may be other brand. 2 Diameter. For makerbot, Ultimaker and other international brand, seems the smaller the tolerance is,the better the print is. But get some China br

by ecoreprap - General

Re: most popular reprap? - 12 years ago

I didn't test international brand but I have bad experience with some China brand. One 3D printer was purchased only 1 year and now it stopped working. Price is no high.

by ecoreprap - General

Re: Yes, 3D printers can go on fire. - 12 years ago

Overload is very danger.

by ecoreprap - Safety & Best Practices

Re: RepRap, Singapore - 13 years ago

Hi,guys, Sorry to bother you. I have noticed that you are searching for a material source for abs.pla filament. we are pla,absfilament manufacturer in China,with high quality and competitive price.so many color and spec offer here. meanwhile we are the supplier of makerbot in China. call me if any request. mail:[email protected] www.ecoreprap.com

by ecoreprap - Singapore RUG

Re: ABS/PLA filament for sale(high quality,wonderfulservice) - 13 years ago

All information will be posted in our website www.ecoreprap.com

by ecoreprap - For Sale

Re: My First Larger Print - Yoda - 13 years ago

Congratulations,roger,it looks very nice!

by ecoreprap - Look what I made!

Re: PLA and ABS vs food safety? - 13 years ago

My idea is how we define "Safe". Personall I think it's OK to use,but I am not sure whether we need to do some special test to sell.

by ecoreprap - General

Re: ABS quality (1,75mm) - 13 years ago

Frédéric,hi, We sent several samples to our HK customer weeks ago, he tested and said the printing goes very well.We have ABS filament,3.00mm and 1.75mm.Many colors optional.We are using CHIMEI ABS as raw material.

by ecoreprap - General

Re: Metal-print Reprap - 13 years ago

Since we can print with plastic like ABS,PLA,and also wood.The idea to print with metal is also very interesting,though the metal have a rather high melting temperature.Perhaps we can print with metal power.

by ecoreprap - Developers