Hi guys.. all items were handed away to their new caring homes I still have the following: CNC MACHINED PULLIES, 20 tooth, 8mm bore if you have any use for those.. let me know.. i got 10 of them and i hate to see stuff being dropped into my drawer (thats because i dont have any drawer anymore ). So if you got a 8mm motors and need the pullies.. let me know! Cheersby badmanjoe - For Sale
Hi guys, Im going to dis-assemble some of my printers and give away their items ++ many more unused NEW items. Sadly i dont have the space anymore nor the time. I have tons of stuff to give away.. Belts (NEW or nearly unused) Pulleys, 8mm bore or 5mm bore.. all aluminum 20/36 teeth RAMPS, hall effect endstops... printrboard rev D Maybe also got a heatbed or two! Price: symbolic prices only!!!by badmanjoe - Israel, Tel Aviv RepRap User Group
Hi guys, Im going to dis-assemble some of my printers and give away their items ++ many more unused NEW items. Sadly i dont have the space anymore nor the time. I have tons of stuff to give away.. Belts (NEW or nearly unused) Pulleys, 8mm bore or 5mm bore.. all aluminum 20/36 teeth RAMPS, hall effect endstops... printrboard rev D Maybe also got a heatbed or two! Price: symbolic prices only!!!by badmanjoe - For Sale
hi, yes how did the marlin go? you can send me further discussion messages to my email ybadran@gmail.comby badmanjoe - Israel, Tel Aviv RepRap User Group
I took a look at the firmware list.. Are you sure the firmware ur using is compatible with RAMPS?! Also im not sure which LCD u got, but the generic LCDs out there are compatible with RAMPS + Merlin, im not sure which other configurations are good. I suggest you look at the firmware compatability issue first. Thesoftware im using is pronterface by kilment. My suggestion to you is using Merlinby badmanjoe - Israel, Tel Aviv RepRap User Group
Hmm im not familiar with the software or firmware ur using.. try to ask on the other forums. it seems to me though that there is no connection between the pc and mega2560.. usually caused by their the com port on the slicer/replicatiorG isnt configured correctly, or the firmware configuration file isnt correctby badmanjoe - Israel, Tel Aviv RepRap User Group
Hi guys.. i got some more stuff if you like: printrboard revD Ramps heatbeds 4988 drivers gt2 belts gt2 20tooth alluminum pullies If someones interested let me know.by badmanjoe - Israel, Tel Aviv RepRap User Group
Hi.. what firmware are you trying to upload? Whe you connect the mega2560, does it install drivers? if you go to the my computer --> devince manager, is the mega2560 showing at the COM port list?by badmanjoe - Israel, Tel Aviv RepRap User Group
Hey, i have an electronic kit and i got belts and pulleys. if you like let me know ybadran@gmail.comby badmanjoe - Israel, Tel Aviv RepRap User Group
Hey Zohar, Let me check what i have.. where are you located?by badmanjoe - Israel, Tel Aviv RepRap User Group
Hi, From my own experience: if youre building a prusa mendel - dont use the reprap wiki.. its outdated, not consistent and is basically.. useless. Rods lengthes arent correct... alot of uneeded screws in the bom.. required screws arent mentioned.. simply terrible. use this for a build manual.. much betterby badmanjoe - General
BTW where are you located?by badmanjoe - Israel, Tel Aviv RepRap User Group
Hello Ohmarinus, FABSTER3D on ebay is the same GADGETS3D! (not the same person, but same items) you can go ahead and buy from him - great guy. I didnt get his ultimate kit, but i bought from him before, very good quality.. you have nothing to worry aboutby badmanjoe - General
got another extra kit for now.. if someones interested then PM me! x1 RAMPS1.4 x5 Stepstick A4988 drivers x1 Mk2 heatbed x1 100k NTC thermsistor 2 meters GT2 belt open (can give more than 2 meters as i got extras) - 6mm width, 2mm pitch 3x GT2 pullies, 20 tooth (alloy/naylon) along with grub screws price: 125$ - israeli buyers get 5% off total 118.75$ (note: the kit does not include a mby badmanjoe - Israel, Tel Aviv RepRap User Group
Hi guys, I got another extra kit for now.. if someones interested then PM me! x1 RAMPS1.4 x5 Stepstick A4988 drivers x1 Mk2 heatbed x1 100k NTC thermsistor 2 meters GT2 belt open (can give more than 2 meters as i got extras) - 6mm width, 2mm pitch 3x GT2 pullies, 20 tooth (alloy/naylon) along with grub screws price: 125$ (note: the kit does not include a mega2560) Shipping.. registered air maby badmanjoe - For Sale
Hi Jaccob, the RAMPS is an arduino SHIELD, which means its a board that you mount on top of the MEGA2560. The Mega2560 is the board that you program, and the RAMPS is the board that helps you connect everything together! On top of the RAMPS, you add 4 or 5 DRIVERS (polulu drivers or any other A4988 compatibles, stepstick etc..). If you want, i can supply you with these and many others (simply Pby badmanjoe - Reprappers
awesome i will try that. i have a usb-to-ttl converter with the PL2303 chip O.o not the ftdi 232RL. it has GND,5v,3.3v,TX,RX please correct me if im not mistaken: gnd --> gnd 5v -> 5v TX -> RX RX -> TX DTR-> nothing need to get some stuff to de-solder this.. will let u know what happensby badmanjoe - Controllers
could be alot of reasons: if you are sure that ur USB port (on the computer and the cable) are working good then the only 2 problems that pop up are: 1- sanguinololu usb port-b socket is broken - and u need to replace it. if thats the problem then its easy to fix. the usb socket is what gives the board its power too.. so if the led doesnt light up it could possibly be it. 2- whole board is brokeby badmanjoe - Sanguino(lolu)
guys in the sanguinololu wiki page they say "Yet another alternative to soldering a IC, could be a USB to TTL-converter" does that mean that i can use a usb-ttl coverter instead of the ftdi chip on board? how?by badmanjoe - Controllers
everything seems perfect O.o im not a master in this but ye im checking it out and everything is in place!by badmanjoe - Controllers
so u suggest that i solder a new chip? will get a new one from ebayby badmanjoe - Controllers
Hi guys, I soldered two sanguinololo boards both using the 1284 chip. both chips came in with the same bootloader. my problem is when i connect one board to the pc using the usb-cable nothing happens.. the device is not recognized at all and nothing appears on the device manager - but the power led on the board lights up (so its receiving power from usb). the second sanguinololo board doesnt faby badmanjoe - Controllers
Hey! i will help you look for an answer. basically i only dealt with RAMPS but in my opinion u have one of the three problems: 1- try a different usb cable! 2- the ftdi chip is damaged 3- the ubs connector on the board is broken ?? when you connect the usb, does the red power on led power up?by badmanjoe - Sanguino(lolu)
cheers for the pointer!by badmanjoe - Israel, Tel Aviv RepRap User Group
it depends on both the bearing and the smooth rods that you got. when you buystainless steel rods make sure u get a good type too (numbers on the stainless steel). As for the bearing.. whether u buy them from US/EU or china.. they are mostly the same.. if u see bearings that cost 12 for 10$ from china or 12 for 20$ from USA - then its a pointer that its the same bearing lol.. if u want good beariby badmanjoe - General
no not hard.. maybe the aluminium sheets and so are the toughest i beleive. the rest isnt that hard to getby badmanjoe - General
I cant beleive people budgeting this project lol.. similar things have been out there for a while O.o hes not offering -anything- new. As for the FPGA, im actually working on something like this already.. basically for fun purposes only. if someone does feel like teaming up then let me know! but dont expect much from this.. i dont expect FPGA to be able to swap the MCU for this purpose - its tooby badmanjoe - Developers
Hi, If this is your first printer - and you're not somewhat whos been building smilar stuff for a while then i suggest the prusa mendel i2. reasons: 1- alot of support 2- u will have alot to learn (both in terms of how to build, and what manuals to look for) 3- easy to upgrade to multi colour and other stuff 4- rather cheap. i must say rostock is awesome.. and i do plan on building one myselfby badmanjoe - General
can you please explain the problem again? i find it difficult to understand your first post..by badmanjoe - Reprappers
Hi gk, i got my items from different sellers, not one.. tis what cut the prices off. if you want a complete list of the sellers then PM me, and i will send you each item and the seller - i just dont want to advertise hereby badmanjoe - Reprappers