Show all posts by user
Everybody here is a developer. Share what you are doing !
just a quick connector question - 7 years ago
Hi just enquiring as now im part of the duet 0.85 for my kossel build i need to finish will these connectors be ok Fleabay link many thanksby chris33 - Duet
Re: Problems with Top Layer. - 7 years ago
I find that if my infill is to sparse then its basically bridging over the gaps, my work arroundis adding a couple more top layersby chris33 - Printing
Re: [EU] Duet 0.8.5 as new - 7 years ago
is that posted to the uk then keep hold of it ill pay weds when i get paid from workby chris33 - For Sale
Re: "mirrored" prints - 7 years ago
what printer you using maybe the home position is incorrectby chris33 - Printing
[Uk] Wanted Duet 0.85 board - 7 years ago
Hi, if any has a duet 0.85 board used but fully working and able to post uk message me with a price please many thanksby chris33 - Wanted
Re: Duet v.0.8.5 for sale - 7 years ago
hi do you still have the board for sall ill be intrested in it if you haveby chris33 - For Sale
Re: Introducing Myself. I've almost built a Prusa I3 - 7 years ago
check the driver if the prob moved when you changed the pololu and it changed have you any pictures of the machine?by chris33 - Reprappers
Re: [WW] SALE! Replikeo shop closing - selling our stock CHEAP - 7 years ago
hi ill be intrested in 2 duet 0.6 on the 26th april if thats possible please private message meby chris33 - For Sale
Re: Missing/Uneven Perimeters! - 7 years ago
try your retraction i would try doing some retraction test printsby chris33 - Printing
Re: Prusa i3 bad printing on specific objects - 7 years ago
what is your nozzle size?? is it a single wall vase is so try the spiral option slow it downby chris33 - Printing
Re: Do we have a verdict on remote driver solutions? - 7 years ago
Quotedrmaestro 3) I checked your web site and the only option for buying is to use Paypal. Do you plan on supporting other payment methods? Unfortunately, we can't use Paypal since June 2016 here (Turkey), so this makes it quite problematic to make an acquisition (that problem also exists for Flex3drive I think) Thanks If you have a problem with paypal then its a paypal issue there isn't anyby chris33 - General
Re: Can anyone diagnose this 3d benchy? - 7 years ago
try it at a slower speedby chris33 - Reprappers
Re: Can anyone diagnose this 3d benchy? - 7 years ago
in my opinion printing at 65 mm/s too fast for a i3 id say 45 mm/s z banding well what type of z have you got 5mm threaded bar or lead screws? don't constrain the leadscrew at the top let them be free to move any pictures of the machine?by chris33 - Reprappers
Re: Filament sensor (Zesty Nimble et al) - 7 years ago
QuoteLykle Since we are talking about the filament sensors, here is a preview of what we were planning. The idea is that in the center there is a magnet rotating. Under that magnet is a sensor sensing the rotation. On the left is a pressure wheel, pressing the filament against the magnet using a 3d printed "spring" in dark blue. On the other side is a clip that will allow you to clip it to thby chris33 - General
Re: New MKS SBASE Smoothieware-compatible board from China - 7 years ago
why people just jump on a thread just to cause agro this thread is for people who have a mks sbase, no disrespect too the smoothieboard there is no need to fill up a thread full of trolling, arthur has made it clear through all the rants blah blah blah, but its not helping no-one coming onto a thread for assistance from THOSE who do own a mk sbase to help others who have, when people just registeby chris33 - Controllers
Re: Makerbot 2 Extruder - 7 years ago
yes if it's a dual then the fan on the extruder that working should be on from start then the second kicks in I think when the 2nd thermistor goes up to a certain temp I am going off a clone too a MakerBot 2 replicator a wanhao duplicator 2, also what material you printing with and temperatures,maybe blocked hotend to if it has pfte liners id check them 1st see how bad they look if its been usedby chris33 - Printing
Re: Makerbot 2 Extruder - 7 years ago
heat creep softening up higher up causing the filament too soften, is the fan working over the heatsink part?by chris33 - Printing
Re: Discussion on the Nimble - 7 years ago
isn't just as simple as a resin batch you need a breathable build plate because ie if you tried to print for example a ping pong ball, when it gets drawn from the resin it cause a vacuum within the inner space, resin printers are messy too and more suited in my opinion for models that require such detailby chris33 - General
Re: New 32 bits ARM MKS Robin with TFT?? - 7 years ago
thats pretty cool you done that wish i knew where to start to change firmware nice option would be a simple keyboard to input gcode manually be goodby chris33 - Controllers
Re: New 32 bits ARM MKS Robin with TFT?? - 7 years ago
Sorry to jump on this thread but needs must, Flyaway i posted in other post about more english, especially in the tft configuration theres no point having the settings in english and the subheadings in chinese. im trying to get the more g29 and g32 to work on the more buttons but don't know how to change the button names not the icons, when i did the g29 it just crashed into my bed so i loaded upby chris33 - Controllers
Re: MKS Base 32 bit? - 7 years ago
Quotearthurwolf QuoteGearheadRed Smoothieware will also not support users of the board too so your only support options are other users and the makers(who are quite unresponsive). The general policy is : * We don't like MKS * If you have a problem with a MKS board, please contact them *first* * If they don't answer you, some of us are likely to help you then, but we won't be happy about it whaby chris33 - General
Re: troubleshooting with TFT28 V1.2 - 7 years ago
I had trouble but i had to open paint and save it as a 16 bit bmp image for it to work also same settings as in the lcd2tft programby chris33 - Controllers
Re: New MKS SBASE Smoothieware-compatible board from China - 7 years ago
QuoteBilli3 QuoteDjrema Quotew3drk If anyone in the states want one, I'm selling my SBASE v1.2. It's been modded with stable oscillators (I'm the one who discovered the initial issue), and the DRV8825s are forced into fast decay mode to allow the use of low inductance steppers with 24v, so no need to mess with diodes. In my opinion mixed decay on the DRV8825 is useless... I was using this boarby chris33 - Controllers
Re: Hot end assembly moving out of print area - 7 years ago
well is your slicer bed parameters setup correctly if not then you will witness your issue, it looks to me that your slicer set up for a cartesian machine then a delta coordinate setupby chris33 - General
Re: New 32 bits ARM MKS Robin with TFT?? - 7 years ago
Quoteflyway97 It's our honor to serve for you,sincerely hope we can deal with you next time. I gather your with mks and i do keep messaging frank on aliexpress but get very vague replies, My issues are with the tft lack of capabilities and potential it could have there is no way for anyone to develop more functional actions on it not just to able to changing the button images, the config i can'tby chris33 - Controllers