See the uploaded image . Move the part on the red cycle on the top side NOT the buttonby glompos21 - Fisher
After many hours my experiments find the following configuration: M301 H1 P12 I0.2 D10 W180 B30by glompos21 - Fisher
I have using the default configuration of the PID for the hot end M301 H1 P12 I0.4 D80 W180 B300 When i set the temperature to be 200-220C it goes excellent. When i set the temperature over 230C, it overshoot and after 4-6 min goes to 300C. I have done some testing reducing by a factor of 2 the P and increase the value of D but the results are the same . Have anyone using different values for theby glompos21 - Fisher
I have reduce the retraction speed no success. I reduce to half the retraction length and it solve the problem until i started print a part with a lot of support material, so again the problem appear. I decrease the extrusion multiplier from 0.95 to 0.90 and the problem was solved. So the problem was that the filament was out of specs with bigger diameter >1.73mm.by glompos21 - Fisher
I have run over 4kg of eSun PLA without any problem. A friend gave me a generic PLA spool and i cannot make it complete a print. The print starts ok but at some point stop exude plastic. Attached you can see what looks like the end of the filament when the printer stop extruding. When i remove the problematic end and reinsert the filament, the printer extrude OK.by glompos21 - Fisher
I have also broke 3 rods. But i have replaced them with others made from FR4 pcb sheets (that what i have in had 12 o'clock Saturday night). Then work very well. I am thinking on replace them with rod ends. I cannot find any information about what is the size of the hole of the ball. It needs to be able to be inserted on the M3 screws of the Fisher.by glompos21 - Fisher
Hi to all/ Καλησπέρα σε ολή την παρέα, My name is Kostas and i am located in Chania. I have build the Fisher kit. Also i have order all the electonics/electrical compoments for filament extrudel, i need to find the mechanical stuff.Has anyone build an extruder for local source parts?by glompos21 - Greek RepRap User Group, ελληνική ομάδα χρηστών