Hello, we have built some 3D printers and we have them for sale at 600 euros each, just because the company has closed. The printer is excellent quality. The firmware used is Marlin 1.0.2, we also have the 1.1.9 version but not with custom LCD tree as the default one. We have used genuine Mean Well RSP_500_24 and the Ultimachine RAMBo board. The extruder is powered by a geared stepper motor 5.18/by Sigourosandreas - For Sale
Yes I have put the correct offsets. I am using the some setups on marlin 1.0.2 and 1.1.8. There is a bug in marlin 1.1.9 and we need to find it and correct it and reserve it in the next marlin updates, too.by Sigourosandreas - Firmware - Marlin
Hello everybody, I was using the marlin 1.1.8 with some changes in Conditionals_post.h. Lines 1009-1012: #define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) #define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) #define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) #define _MESH_MAby Sigourosandreas - Firmware - Marlin
Hello everybody, I was using the marlin 1.1.8 with some changes in Conditionals_post.h. Lines 1009-1012: #define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) #define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) #define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)by Sigourosandreas - Firmware - Marlin
Hi kabelfrikkler, I have attached a photo from rambo board. I have my extruder's heater block connected to "heat 0". The extruder's fan is connected to "fan 0" and this is pin 8. The part cooling fans are connected to "fan 2" and this is pin 2, as per pins RAMBO in marlin The problem is that when I try to upload: #define E0_AUTO_FAN_PIN 8, it gives me the following: SanityCheck.h:977: error: #eby Sigourosandreas - Firmware - Marlin
Hello, I am trying to configure marlin 1.1.8 working with my printer, but I am having problem working the extruder_fan and the part_cooling_fan. Can anyone please help? About the extruder_fan. I have set pin 8 in RAMBo board, which is the FAN0. #define E0_AUTO_FAN_PIN 8 But it gives me the following: SanityCheck.h:977: error: #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN." #error "by Sigourosandreas - Firmware - Marlin
So, after the corrections that Dust proposed, I have made the following. Into Conditionals_post.h found the: #else // Boundaries for Cartesian probing based on bed limits #define _MIN_PROBE_X (max(X_MIN_BED, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) #define _MIN_PROBE_Y (max(Y_MIN_BED, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) #define _MAX_PROBE_X (min(X_MAX_BED, X_MAX_POS + X_by Sigourosandreas - Firmware - Marlin
Hi Dust, I did what you advised me to do and it worked perfectly. Thanks. We fixed the G28 command. Do I have to report this bug to github or have you already? Then I defined the AUTO_BED_LEVELING_LINEAR and has again almost the some error. "static assertion failed: RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." Can you please check what to change? And one more thing to ask. Wheby Sigourosandreas - Firmware - Marlin
To obewan, I thought that the Z safe homing was to set a specific point were the probe should home the Z axis without hitting anywhere. But maybe I was mistaken. To Dust, I have attached a photo of my machine. If you see, there are 4 aluminum corners in the corners of the bed, not only to hold the glass in place but for homing the probe. So the X axis home should be -28 in order to get the noby Sigourosandreas - Firmware - Marlin
Hi Clif, Yes my sensor needs to be triggered out of the bed. My bed is square of 275x275mm and my probe triggers at a square 298x298mm. So it has to move outside of the bed, left - right and front - back. I tried what you say, but still giving the same error. I also have tried the following, but still gives the same error (and it was just a trying spot, cannot be the final): // - Prevent Z homby Sigourosandreas - Firmware - Marlin
Hello everybody, I am new here and I need some help with Marlin firmware. Every time I try to upload the firmware I get the message: #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe." I am using an inductive probe and is 16mm right of the nozzle in the X axis, 0 in the Y axis and 2mm above the nozzle in the Z axis. My X axis endstop is 27mm left from the X 0 point, the Y axis endstopby Sigourosandreas - Firmware - Marlin
ΠΩΛΕΊΤΑΙ 3D εκτυπωτής Mr Bot 280 της εταιρείας uBuild-3D, ΚΑΙΝΟΥΡΓΙΟΣ στο κουτί του. Λόγω κλεισίματος εταιρείας. Χώρος εκτύπωσης 275 x275 x275 mm. Τυπώνει όλων των ειδών τα πλαστικά, καθώς και τα ελαστικά. Δίνεται με όλα τα παρελκόμενα εξαρτήματα, χωρίς υλικό εκτύπωσης. Περισσότερες πληροφορίες στις εικόνες, τιμή 600€, απογευματινές ώρες 16:00-22:00, 6977953256 ή sigouby Sigourosandreas - Greek RepRap User Group, ελληνική ομάδα χρηστών
Ψάχνω προγραμματιστή για να τροποποιήσω κάποια πράγματα στο repetier firmware. Έχουν ήδη γίνει κάποιες τροποποιήσεις σύμφωνα με τις ανάγκες μου αλλά θέλει λίγη δουλίτσα ακόμα. Έχει κανείς τις γνώσεις για κάτι τέτοιο; Όποιος ενδιαφέρεται, τηλεφωνήστε μου στο 6977953256. Συγούρος Ανδρέας Ή στείλτε μου μήνυμα στο sigourosandreaby Sigourosandreas - Greek RepRap User Group, ελληνική ομάδα χρηστών