Show me you print parts for ANY "machine" printed on Huxley. For now Im very disappointed. Square shapes was rectangles, circles are something from egg shapes to cat eye shapes... Grrrrrrrrby Suljo - Huxley
I think that you have problem with sticking of first layer. Try to increase bed temperature in Slicer at Filament settings tab for first layer at 95C and for other layers at 57C, and for extruder for first layer at 200-205C and for other layers at 185C I have similar problem with kapton tape but when I put hair spray on it my biggest problem now is how to separate final print from hotbed. Also trby Suljo - Huxley
Hi Y motor runs normally then slows at some point during print at Y home direction then goes at normal speed when prints in opposite direction. I marked with red at second cube image pattern where Y motor slows. This cause to have rectangle base shape instead of square. More wired result was during printing circular objects, the are not even ellipse but something like cat eye shape? Belts are tigby Suljo - Huxley
THNX Squeeks for response. Finally I know that I talk with real people While I waiting for any response from RepRapPRO support and my first post here I just disassemble Hotbed, measure all and assemble it again. All seams to be OK as in the first place. For now head follows movement commands and extruder without filament (cold extrusion) works. Still I dont know how but it works. Normally dont kby Suljo - Huxley
Hi I connect everything on Huxley and in software Macpronterface endstops works and pressing a home button works to but if I send command G1 X5 F500 nothing is happening only Error message jumps on right side of software window: Printer stopped due to errors. Fix the error and use M999 to restart! (Temperature is reset. Set it before restarting). Also while Checking temperature graph shows Heatby Suljo - Huxley