Ok I printed a 40mm test cube. It came out 50mm in the xy axes and 100mm in the z axis, what gives?by raijinspecial - RepSnapper
I'm starting to suspect that it is printing two layers for each one it should be printing, but I'm not sure how to tell in the code if its doing it. Any thoughts?by raijinspecial - RepSnapper
I just finished building my Prusa and managed to tweak the settings in repsnapper to get some decent prints. The only problem is the dimensions in the z-axis seem to be two times greater than is shown on the STL file or the gcode trace in repsnapper. For example, when I try to print a prusa base vertex with foot, the holes for the threaded printed by the x and y axes are the perfect size and coby raijinspecial - RepSnapper
Hi guys, please forgive me for the n00bish questions, but I am a very large n00b. I have finished constructing my prusa and connected everything to the Gen6 batch 4 board I bought from mendel-parts.com. I have spliced the two z-motors together by cutting the connector off one of them and soldering the wires to the wires of the same color on the other motor which is plugged into the board on theby raijinspecial - Controllers