Hi, Does anyone know when I can get in to change the machine time / material cost setting? I guess its set up for electricity prices for the country where the software is developing and the material is probably ABS. I'd like to update to get a result that is accurate. Cheersby Makro - Skeinforge
Hi, If this is the place to report bugs............... When connecting to printer, to avoid a time out, most times I have to hit connect and straight away hit a button to move a motor. Is there somewhere I can "add a line" that when "connect" button is pressed move eg. Z axis up 1mm. Can that be done in the custom button tabs? Anyone know how to do that? This is repsnap windows i'm using.by Makro - RepSnapper
HI, I have a mendel and use repsnapper to get the printbed nice and level. There are times when I hit the wrong button and the extruder carriage goes flying off and rams into the frame side that doesn't have an opto to stop it. I'd like to add an opto to this other side to save the pulley grinding out the belt. I'm using Camiels Gen6 so I don't think I can actually add more optos to the boardby Makro - Developers
also thanks for the end code - works great!by Makro - Skeinforge
ok thanks for your thoughts cheersby Makro - Skeinforge
thnks for the end gcode, I'll give it a go. as for the 1st question, I thought it would be a bit unclear, if layer height is .3mm and an cube object height is 1mm .... when it wants to do the next layer to start the cylinder ... it can only start at a Z height of 0.9 or 1.2mm. It can't actually do 1mm if you tell it to go up in .3 steps. no¿ so would SF start building the cylinder fromby Makro - Skeinforge
Hi SFers, If a z axis cubical extrusion has a height of 10mm and layer height is set to 0.3mm and a cylinder extrudes up from the top surface of the cube.... & 10·/.3 means that the first layer of the cylindrical extrusion starts - below or above the 10mm cube top surface¿?? & i had another q but its gone now oh yeah what would be the end gcode for : on finish move up in the Z axiby Makro - Skeinforge