Show all posts by user
Support for the quite nice RAMPS Electronics. See also http://reprap.org/wiki/RAMPS.
Re: Sainsmart 12864 LCD backlight and SD speed questions - 10 years ago
QuoteMiggyMan The jumper on the back will turn it on permanently iirc. quick question (although i'm a bit late to the game) do you know which pin the jumper connects to gnd or +5... so i can put it in the menu?by adibadro - Reprappers
Re: Repetier-Host / Z Homeposition / R2C2_Teacup - 12 years ago
I have a weird Z-axis problem: no matter what command I try or how I set up the firmware my Z axis will not travel beyond 80 mm. if I go to , let's say 100 mm, it'll stop at 80 and when I go back it'll start moving once I'm going for a value that's under 80 mm. I've tried every debugging method I could think of. Please help! not that 80 mm is not a good height but I have 165 mm of clearanceby adibadro - Repetier
axis cannot go past a random value - 12 years ago
Hi everybody! My problem is a bit weird and I've done all I could think of to "fix" it. I'm running repetier both on the printer and the PC. Everything works and the printer is usable (quite good actually). I just now noticed this issue since it's the first time I wanted to print something above 80mm in height. There is no error message. It tells me it is going up to the set max height and it stby adibadro - Smart_Rap
Re: Stumped on Ramps 1.4. Stepper Wiring. Motors dont work, everything else does. - 12 years ago
hi everybody! i have the same issue and it's getting frustrating: - Marlin + Pronterface - optial end-stops (already inversed the logic in Marlin) - using the A4988 drivers and they're connected properly - using 3 jumpers under them - atx power source is rated at 18 amps - not using a heated bed and the hothead works (heats up pretty fast) - all i get is a weird vibration from the motors - no rby adibadro - RAMPS Electronics