Seems it has fixed itself somehow, but having problems with the D9 socket for my printed parts fan. There is no voltage coming out of it at all, even though I have selected the "EFB" config, and both the extruder and bed sockets work fine. This has shown up on 3 different boards, could it be the Mega board that's the problem, and could someone check my configuration.h to see if I've missed anythiby Mikor - RAMPS Electronics
Ok, changed that, but doesn't seem to have fixed anything and now the left Z motor won't move, just kind of shuddering in place with the right motor doing the same previous reversed motion and now it won't read the SD card even though it detects it inserted/removed Attached my Conifguration.h, hopefully it sheds light on a problem/issue I may have missedby Mikor - RAMPS Electronics
Thanks, but the z homing direction was already set at "-1". Should I set it to "1" and flip the plugs?by Mikor - RAMPS Electronics
Finished replacing the mainboard of my Malyan M150 with a RAMPS 1.4 after the former burnt out, followed the guides etc. Everything seems to be working ok, with all axis' homing properly like they did originally by hitting the min stops and backing off. However, when attempting to print, the Z axis motors move the extruder downwards for each layer instead of upwards. Really scratching my head onby Mikor - RAMPS Electronics