I used the normal E3D shroud with fan at first but this time I used a 40x40x10 fan and later even a second one by designing a special shroud. Despite the heavy increase and probably overkill cooling it did not change the result.by Ravalen - Printing
I'll try to do something about the cooling and come back later.by Ravalen - Printing
Hey there, I use the Duet 2 Wifi on my custom made printer but I have run into a massive problem with the extruder completely clogging after only seconds of use. The extruder that I use is an original E3D v6 all-metal hotend in a bowden configuration. After disassembling it and removing all the plastic out of the nozzle, heatbreak and sometimes even the heat sink I then run the printer and let iby Ravalen - Printing
I bought a Flsun printer cube and it came with the Makerbase MKS Gen L V1.0 board. Here is a link to the product. After only a couple of prints I have encountered a problem, the heatbed no longer heats up. This is what happens: When the heatbed it's power wires are plugged in the LED indicating power is being routed does NOT turn on. If I unplug the wires then the same LED indicator DOES turn onby Ravalen - RAMPS Electronics