Hi, ist zwar schon ein alter Thread, aber ich greif das Thema nochmal auf. Da ich lange auch das Problem hatte ein passendes Profil zu finden, habe ich selbst eins entwickelt und herstellen lassen. vielleicht gib es ja noch Bedarf. hier der link:von lines11 - Allgemeines
Hi, ich bin Stefan von der Firma AllgäuTec aus Leutkirch im Allgäu. Seit 2014 baue ich meine 3D Drucker selbst. Irgendwann bin ich auf das Profil von Open builds gestoßen. Das hat dem Vorteil den Rahmen und die Führungen gleich in einem zu haben. Die Kosten waren leider hoch, da man das Profil in den USA bestellen musste. Darum wollte ich mein eigenes entwerfen. Das Besondere ist, dass man gleivon lines11 - Kommerzielle Angebote & Produktvorstellungen
Ich mache mir auch noch einen 2. Delta, aber nebenbei gleich einen core xy. Den Delta (übrigens komplett Kosten von 210€) den ich jetzt in Gebrauch habe eignet sich super um Figuren, Vasen...(ohne infill) zu drucken, doch bei großen Teilen mit ca. 50% infill (viele Richtungswechsel) musste ich feststellen, dass sich die äußeren und inneren Perimeter an manchen Stellen nicht mit dem Infill verbindvon lines11 - Allgemeines
Ich muss erhlich sagen, dass ich gerade am überlegen bin einen core xy zu bauen. Habe schon zuviel Zeit mit meinem Delta "verschwendet". Ich habe nur ne Uhr reingemacht um mal zu sehen um wie viel es sich handelt, mir ist auch klar, dass das Ergebnis 50mm höher nicht mehr genau so zutreffen muss. Was meinst du denn mit "da stimmt nix", ich selbst bin im Moment gar nicht soo unzufrieden, zwar nichvon lines11 - Allgemeines
Das Teil ist ca 115 X 115mm groß. Habt ihr ne idee wie man die Fäden besser in den Griff bekommt? Habe bei slic3er Retract schon auf 4,5mm erhöt. Drucke mit 190 Grad(pla) und ner Lüftergeschwindigkeit von 70 (weiss die Einheit nicht genau).von lines11 - Allgemeines
ach übrigens ich nutze rich cattel´s Marlin habe aber auch schon johan rocholl`s versucht. Doch bei beiden Versionen konnte ich mit dem Befehl g30a den Delta nicht richtig Kalibrieren (tower a und b war gut, bei c war ich ca 1mm überm Bett)von lines11 - Allgemeines
Habe ihn jetzt so lala hinbekommen sodass ich relativ große Teile drucken kann, jedoch hab ich immer ein schlechtes Gewissen, da man an manchen Stellen immer wieder hört wie die Düse über den letzten Layer reibt. Ich baue mir noch einen mit mehreren Verbesserungen und versuche, dass die Gelenke super genau passen, werde nun Kugellagerkugeln und ausgedrehte Pfannen nutzen. Außerdem sollten die Pulvon lines11 - Allgemeines
Für mich auch, der Grund dafür könnte sein, dass du eine zu hohe Beschleunigung (Acceleration) oder ein zu hohes Bremsmoment (jerk) eingestellt hast. Sorry konnte deine config nicht öffnen. Natürlich kann der Grund auch von zu hohen Vorschüben kommen, da der 1. Layer normalerweise langsamer gedruckt wird und es ja dort zu keinen Fehlern kommt.von lines11 - Allgemeines
hi, das sollte ich wohl nochmals genauer checken. hab zwar schonmal draufgeschaut, gespannt, fester gespannt aber ohne Erfolg. Werde das morgen mal nochmal genauer anschauen und langsam fahren. ich dachte auch schon an meine magent Kugeln, die haben einen Durchmesser von 9.8mm und meine Pfannen haben genau 10mm. Darum hab ich mir 10mm Kugellagerkugeln bestellt. Aber bevor ich die einbau schau icvon lines11 - Allgemeines
Hi, Konntest du das Problem beheben, ich hab ein ähnliches Problem. Habe dazu ein Video gemacht. Beim richtungswechsel geht meine düse hoch. Wenn ich aber von der Mitte zu den türmen fahr passt es. Vorab schon mal dankevon lines11 - Allgemeines
Yes I'm sure all arms are exactly same length, all are between +-0.05mm. I know the mirror is not the accurarest thing I made,but it's functional, and flat. The directions watch makes a turn on every direction change, the cuvre goes Steep up and shellows during the move down to the same point of start. Hope you understand mevon lines11 - Delta Machines
Hi, I´ve tested the segments per mm, parameter, but with no succsess. i played with acallaration and jerk, too, nothing better. At the moment i have no idea what the reason could be . i made a triangel to all three towers, i go to tower a, b to c and to x0y0 always ca 0.2 nozzel lift. But from x0y0 to tower c it is fine. i made one more video . At the moment i would nothting rather doing thanvon lines11 - Delta Machines
hey, the print quality of my pi is not bad, but if i print larger pieces, the problem is that the nozzel still scrubs on the last layer. i have tested g30a but still the same. i think the problem is when the printer make a direction change, the nozzel lifts ca 0,1 mm up. i made a video , what do you think could the reason for that?von lines11 - Delta Machines
i had the problem with much tapping too. in my case i set m y x y z steps per mm from 80 to 80.2 after that the auto leveling was tapping 10-15 times till the piont was stored. with 80steps/mm the problem was solved.von lines11 - Delta Machines
ok, i now use rich cattel again. Nice to know that eeprom is not changing anithing. At the moment i print a hand from thingiverse looks good. not as good as my repstrap but 4 times faster. i have to google more about eeprom to understand it complete, but the endstop offset and the delta radius offset changes are working well. thank you for this information again. at the moment i pirnt without g2von lines11 - Delta Machines
Thank you, i never used reptier till now, i think i have to. i readjusted my cp now with m666 its much easiear and safes a lot time i waste one week, if i have questions i ask you earlier.i print at the moment a cube, it looks like that the extruder make much steps (440) with the cherry pi III extruder. is it right that the disadvantage of eeprom is, when i upload another firmware to my arduino tvon lines11 - Delta Machines
Hi here are a few pic´s of my cp and the repstrap who made it. Is it possible to look in eeprom?von lines11 - Delta Machines
Ok, i'll Check this tomorrow. Thank you for your fast answer. I saw your last posts, maybe that will solve my Problem, because I saw that one rod lost conntact with the magnet ball, When I drive to a position far away from x0,y0, like y80 x30 or something like that. I think I reassemble a line, but I like to use the magnet balls anyway. Where are the endstop positions in marlin saved, when I adjuvon lines11 - Delta Machines
Hi Andy many thanks for the fast answer. At the moment i use johann rocholls marlin, but i´ve used rich cattel´s too. i made a lot of tests with the smoth rod offset but my printer still prints not flat. here are is the actuell config.h #ifndef CONFIGURATION_H #define CONFIGURATION_H // This configuration file contains the basic settings. // Advanced settings can be found in Configuration_advvon lines11 - Delta Machines