@jand @zelogik (I am also not affiliated to any of the 3(!) companies I cited) As I said "it depends" ... from where it is cheaper/better to buy (for me with a tiny order like this it's "all shipping cost" ) (BTW: Dold is a Motedis Partner and they actually offer any cut as service ($)) ...but I drill myself ;-) ... and haven't asked them (I did see a bench drill on your pics ) Have you seen tvon Reinhold - CoreXY Machines
@jand Nice work! Try the "add+20mm-Drill-Hole-and-connect-to-center-M6-opposite-profile" and imho you don't need "Innenwinkel" for frame (what do you do with the remaining 96pcs anyway ;-) ) Depending on where you are and whether you can buy as a company these may come cheap(er): (http://www.ebay.de/itm/150650616574) I can absolutely recommend Dold as a reliable source. Where are you goingvon Reinhold - CoreXY Machines
Greetings to Nice la Belle If you cannot find it in France ... maybe you can make your own (seems you have workshop(s) available)... (german but translate.google.com gives a readable (sort of translation-else pm me)) (please don't hurt yourself using Dichlormethan !) Quotedr.henschkeCoating procedure: The PEI (polyetherimide) is dissolved in dichloromethane (poisonous! and highly flammable)von Reinhold - CoreXY Machines
Quotezelogik ...make a good enclosure today or this week. You know what they say: "No pics ? ... it didn't happen !" Can you (really) "see" (=prove) a speed difference with LM8EE vs IGUS ? ... WHAT do you see? Printing Surface Some (german) Developers are enthusiastic about what they call a PermanentPlate (Dauerdruckplatte) a PEI "impregnated" (=coated) 3 mm Aluminium plate (mostly with avon Reinhold - CoreXY Machines
I think you haven't yet seen this post: Quoterepetier repetier [ PM ] Re: repetier: stops randomly February 22, 2014 06:55AM First you should find out what kind of hang you have. As you know th eline where it happened, you were not printing from sd card. In that case it might wait for a "ok" to receive so buffers get empty. That should only happen if you have communication errors happening. Ifvon Reinhold - CNC Routers, Mills, and Hybrid RepRapping
Have a look here (and ignore watercooling and all for a moment) Regards Reinholdvon Reinhold - CNC Routers, Mills, and Hybrid RepRapping
Just a short praise on zelogik's achievement.. foudroyante... As to the frame-connection: i) Motedis Germany still have that connector for 2.52€ (3.02€ 1pc) "Würfelverbinder 40 I-Typ Nut 8" ii) ...but you don't really need it (imho) - at each corner just make a single (40x40) extrusion 40mm longer ("include" the Cornerconnect so to speak) - tap a M8 thread into the "extrusion center hole" (ovon Reinhold - CoreXY Machines
QuoteP. S. Ich mag keine Gehrung. Kann ich ja verstehen .... aber du mit deiner (für) "Holz CNC" solltest dich mit diesem gefrästen Eckverbindungs-"auf Gehrung"-Profil anfreunden können... (ist immer im Winkel und schwupps verleimt (Nachteil: CNC)) ...sry für das Geschmiere statt Zeichnung Gruß Reinhld P.S.: (für) HOLZ CNC NEIDvon Reinhold - Projekte
Ich komme aus 'ner Holzwurm Familie und finde die "laserverbrannten" Plastikholz US Teile ganz schlimm. Der "Reprap Prusa i3 Frame...aus 6 mm Qualitäts-Sperrholz (Birke)" -regelmäßig in ibäh- ist auch nicht so wirklich meine Vorstellung von "Maschinenbau" " ...aber über die Vorzüge von MDF werden wir uns kaum streiten Deine "Holz CNC" kann einen aber schon neidisch machen. Gruß Reinhld P.S.von Reinhold - Projekte
Hallo Frank Das ist (endlich) wieder mal ein Holzwurm"-drucker Jetzt gib deinem Kind noch 'nen Namen Gruß Reinhldvon Reinhold - Projekte
Hallo Marcus Gruß nach Frankfurt ... hab dir unter Manupool 'ne Anfrage geschickt. Läuft die nächste Rumba Sammelbestellung (wie geplant) nächste Woche an? Gruß Reinholdvon Reinhold - Kommerzielle Angebote & Produktvorstellungen