Zeige alle Beiträge eines Teilnehmers
Sämtliche Software rund um den 3D-Druck: Firmware, Hostsoftware, Slicer, 3D-Cad, Printserver, etc.
Re: G33 Delta Auto Kalibration hat so ein kleines Problem 
- 5 Jahre zuvor
Okay, problem gelößt. Allerdings hinterlasse ich hier noch meine 2 Config. Files sollte wer das gleiche Problem haben.von Isembor - Software
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Hello, So far it seems to work now. I changed the driver type to TMC2208 and, i changed these settings below. I think thats was the problem. #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 #define XYZ_PULLEY_TEETH 20von Isembor - Delta Machines
Re: Printer crashes in the Drivebelts - 5 Jahre zuvor
okay , thank you for your Answer. It looks like it works now.von Isembor - Delta Machines
Printer crashes in the Drivebelts - 5 Jahre zuvor
Hello , So the Titel says it all. My Anycubic Kossel Delta Printer keeps Crashing in my Drive Belts while Printing and Probing. I am using an anycubic kossel with an skr. 1.4 Turbo Mainboard and 2208 TMC Stepper Drivers. With a PROBING_MARGIN of 50 it stops crashing while Probing but then Printing it still Crashes, and Changing the DELTA_PRINTABLE_RADIUS and the DELTA_RADIUS not seems to changevon Isembor - Delta Machines
G33 Delta Auto Kalibration hat so ein kleines Problem - 5 Jahre zuvor
Guten Tag , Also ich habe einen Anycubic Kossel Delta Drucker, mit einem Skr 1.4 Turbo Board und TMC 2208 Stepper Driver. Mein Problem ist jedes mal wenn ich die Auto Kalibrierung durchführen möchte will er auserhalb von meinem Druckbett messen und Kracht mir so jedesmal in meine Antriebsriemen. genau das gleiche passiert wenn ich Versuche zu Drucken. Mit einer Probing Margin vom 50 bleibt er zwvon Isembor - Software
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Hello , Okay now he wants to Probe , but I have a new Issue while Probing and Printig he crashes in my Drivebelts and trys too Probe outside the bed. Changing the Delta Radius dont seems too change nothing , but with a probing marching of 50 he will at least Probe inside the bed, but then Printing he hits the Drivebelts again. I attach the Updated Config file. Maybe someone has an Idea.von Isembor - Delta Machines
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Here is the Updatet Version of my Config file.von Isembor - Delta Machines
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Okay , M48 works, and i changed the settings. Now he at least trys to Probe and reaches the bed, but he wants too Measure outside the Printing bed. Does anyone have an Idea whats the Problem ?von Isembor - Delta Machines
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Okay , i changed the probe z offset to -16.5. but i have in the moment no z probe ,because mine just died when i get a new one i will test this Setting and will also try and run an M48.von Isembor - Delta Machines
Re: G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Yes I checked them with M119 and it looks right, everthing shows triggered then i push them And i also checked them with an Multimetervon Isembor - Delta Machines
G33 - Delta Auto Calibration Just won´t Work. - 5 Jahre zuvor
Hello , I have an issue with my G33 - Delta Auto Calibration, and no more Ideas to fix it. He trys to calibrate but moves to the Endstop and then he writes Probing Failed, or he trys to probe and moves weirdly up and down and when comes Stow Probe and Probing Failed. I have an Anycubic Kossel with Mechanical Endstops and an Anycubic V2 Z Probe. I am using an SKR 1.4 Turbo with 2208 V3 stepper dvon Isembor - Delta Machines