Zeige alle Beiträge eines Teilnehmers

Re: Looking for advice/tips on first reprap kit. - 9 Jahre zuvor

replikeo (I don't think this is US): ne diytechshop: no makerfarm: maybe nwreprap: no 3dprinterczar: [3dprinterczar.com] should work and you can get a melzi

von mekmekmek - General Mendel Topics

Re: Prusa stopping mid-print - 9 Jahre zuvor

sound like usb cabel you whant a SD-cardreader, but you can take alternative powersorce for arduino to stabelize

von mekmekmek - General Mendel Topics

Re: MK3 Alu-Heatbed how to print with a hole in center. - 9 Jahre zuvor

hey: buy a glass => no hole and perfekt plane buy a power extention => not needed but without MK3 headbed is just a joke buy a roll of Bluetape => (what you realy need)and you pla will stick for example here: [3d-druck-shop.youin3d.com]

von mekmekmek - General Mendel Topics

Re: Prusa i3V and Ninja Flex - 9 Jahre zuvor

E3D is best reprappro medel hotend kind of works for bowden on retract smaller 1mm

von mekmekmek - General Mendel Topics

Re: Prusa I3 Help - 9 Jahre zuvor

try m114 to check endstops status its S + - on the foto looks like you pluged + - S in (just from the collors) and power out is ext fan bed (for motheboard 33) so you have plugt in a fan and a bed

von mekmekmek - General Mendel Topics

Re: MendelMax 2 vs Rostock Max V2 - 9 Jahre zuvor

Quotethe mendelmax suffers from z banding and needs a floating z axis upgrade to make good prints if you set your steps and layerhight correct the mendelmax 2.5 prints very good without any z-step artifacts

von mekmekmek - General Mendel Topics

Re: Full graphic controller screen problem - 9 Jahre zuvor

hm... you wanna test your elektronics starting by lcd voltage. should be 5.0V not 4,7 or 5,3 and do this with and without every consumer Bed, Hotend, Motors.

von mekmekmek - General Mendel Topics

Re: Full graphic controller screen problem - 9 Jahre zuvor

ramps 1.4 elektronic? have power in on 5A and 11A?

von mekmekmek - General Mendel Topics

Re: genarating surface from game maps - 10 Jahre zuvor

so i get somethig that can be used. i took a java program i found for this. the gimpplugin is also working well, but openscad is go an shot himself instandly on this one. would be kind of intersting how fig the fiels are allowed to be. for tool chain look

von mekmekmek - 3D Design tools

Re: genarating surface from game maps - 10 Jahre zuvor

thx! this is what i need. and yes looks like the wrong part of map file. but i know there is a way to import a gray scale as maps for BA so should be possible to export. will update when found some time for this..

von mekmekmek - 3D Design tools

Re: Pronterface and Cura Problem - 10 Jahre zuvor

text like Quote T:224.8 E:0 W:8 T:224.6 E:0 W:7 T:224.6 E:0 W:6 T:224.5 E:0 W:5 T:224.5 E:0 W:4 T:224.3 E:0 W:3 T:224.3 E:0 W:2 T:224.4 E:0 W:1 T:224.3 E:0 W:0 will only genarated if your start g-code tells your mashine to do so. again did you buy a kit or build it your self? May be it help when you puplish your configuration.h of your firmware and specifications of used hardware.

von mekmekmek - General Mendel Topics

genarating surface from game maps - 10 Jahre zuvor

i whant to take a depthsmap out ouf a 3dgame to genarate Surface for game tiles. so take something like and put it on something like do anyone know openscad is able to read data like this? or is there may be a more mighty language?

von mekmekmek - 3D Design tools

Re: Problem with top layer - 10 Jahre zuvor

o.0 Quoteuncel_bob Unless you have a nozzle diameter below 0.2 mm, a 0.1 mm layer height simply isn't going to work for extrusion. It would only work with that nozzle if your bed is level to about 0.01 mm (and thus flat to better than 0.01 mm). Even with auto bed leveling and a fancy bed those numbers will be very hard to hit. taking paper or wood as print ground 0.05mm layerheigth is working

von mekmekmek - General Mendel Topics

Re: Pronterface and Cura Problem - 10 Jahre zuvor

QuoteMechanic But, when using Cura or Pronterface as main program to print a test object, the machine is "homing", but immidiate after that the machine stops and it seems that the connection Is broken up. That is, i can then move the x and y-axes freely in their respective directions. this is how disconnect looks by me but im using sprinter and melzi board Quotepronterface Can't read from prin

von mekmekmek - General Mendel Topics

Re: Z axies only go down - 10 Jahre zuvor

had the same issue. when make your firmware update you need to configure the Configuration.h file there should be a part like this: // Inverting axis direction const bool INVERT_X_DIR = true; const bool INVERT_Y_DIR = false; const bool INVERT_Z_DIR = false; const bool INVERT_E_DIR = true; so you can just invert movment esay.

von mekmekmek - General Mendel Topics

Re: Pronterface and Cura Problem - 10 Jahre zuvor

can you say this in english?

von mekmekmek - General Mendel Topics

Re: Problem with top layer - 10 Jahre zuvor

may be you wanna look in your firmware settings to check your feedrate for the extruder. but you can also print two sigle walled circels with are spaced to have the printer retract between them (turn off any random settings for this. for example jitter) then you will be able to see where the extruding fails. i bet he restart to week having not the grip he needs on the filament at 200mm/s.

von mekmekmek - General Mendel Topics

Re: OLED Display - 10 Jahre zuvor

there is a fork for the firmware but looks like usb support is NOT finished.

von mekmekmek - Reprappers

Re: Fixed torn USB receptacle - 10 Jahre zuvor

hi Exelent post ! got everything fixed and the printer is running again. i had problems to get the ground in this tiny hole so i solder it to the food of the sdcardcase. also made some pictures: 1. unmount the melzi 2. make 4 tined cabels 3.solder them to the usb female 4.Check this ! realy! 5. Isolate the pins 6. solder the freeends of pin1 to3 to your melzi 7. solder ground(pin5)

von mekmekmek - Reprappers