QuoteNico95 Hallo, ich suche nach einem guten Hotend habe bis jetzt mit einem J-Head gearbeitet, bin aber nicht zu zufrieden damit. Nun suche ich ein neues Hotend welches vom Preis her nicht all zu teuer ist und mit dem man möglichst viele verschiedene Arten von Kunststoff drucken kann. Kann mir jemand gute Hotends nennen wenn möglich mit einem Link zum Händler? Danke im vorraus Gruß Nico Thevon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
Quotewindiesel Hallo Forum, liebe Etechniker, ich habe mich dazu entschieden mir ein Osziloskop zuzulegen. Da ich keine Ahnung habe von den Dingern wollte ich mal nachfragen auf was man bei dem Kauf achten sollte. Ich habe zwar schon ein paar mal ein oszi bedient mich aber nie mit den Geträten selber auseinander gesetzt. Es sollte im bereich 250-300 Euro kosten, 2 Tastkopfe haben und die Möglivon Reprapdiscount - Offtopic
Quoteseefew @Elvira: You shouldn't reedit your posts. It give em a different meaning and rips the answers out of context. My post was manipulated by admin VDX, he is smart, he did not delete the whole post, he deleted some of my words so that the whole post gets now another meaning. However, i see it not allowed by admins to criticise such people which selling BAD REMAKES of my developementvon Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteStud54 Hallo Angelo. Dein Treiber durfte schon in meinem Gehäuse Platz nehmen. Jetzt warte ich noch aufs DUE und ein paar ICs samt Kleinkram. Schönen Sonntag noch Sven Clean setup, respect !von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
Quotejsturm Die Befestigungsschrauben, die mitgeliefert werden, sind nicht für meine 47mm Wantai Motore vorgesehen - sie sind zu kurz. Bei 40mm Motore sollten sie aber einwandfrei passen Angelo empfiehlt daher, sich aus Gewindestangen selber eine passende Schraube zu "basteln". 3mm Gewindestange - passend ablängen - selbstsichernde Mutter drauf und fertig Ich hab es versucht -> leider lässt sivon Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteLe-Seaw weil man weiss was hier im Forum dann pasiert wenn es jemand kauft Siehe Sainsmart-Threads *** removed for improper speech *** Have fun "Der Preis ist Heiss..."von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
no commentvon Reprapdiscount - Allgemeines
here a s size comparation between new and old hall endstops sizevon Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteStud54 Das geht alles noch viel schlimmer... Habt ihr gewusst, dass hier in Deutschland gezielt Leute dafür bezahlt werden, hier Produkte zu kaufen und nach China zu schicken um sie dort zu zerlegen und oder gleich zu kopieren. So ist es mir mal vor Jahren passiert. Etwas entwickelt und schwupps wars bei Ebay.... Das kann ich garnich ab ....noch weniger als diese Patentgeschichte....die scvon Reprapdiscount - Allgemeines
Angelo, movie looks very nice. Actualy we did this drivers 10 months ago, here is also one movie showing a comparation how quite they are compared to DRV8825. We tested long time and made few hardware revisions and now they are working perfect.von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteWilly Heute habe ich von Angelo ein paar 1/128er Treiber bekommen und gleich mal getestet: Die Dinger sind tatsächlich ein Quantensprung . Der oben beschriebene Effekt, dass die Mikroschritte nicht sauber ausgeführt werden, kann mit dem DECAY-Poti "weggeregelt" werden. Wichtig: der Enable-Eingang ist nicht wie bei den Pololus invertiert. Die Firmware muss also entsprechend eingestellt wervon Reprapdiscount - Elektrik & Elektronik
QuoteHelmi So, mal ein kleines Update. Ich hab den heute nochmal komplett zerlegt und von Abrieb etc befreit. Das Merlin-Hotend habe ich eigens getestet - es geht gerade so mit der Hand das Filament (PLA) zu drücken. Wie gesagt fehlt mir etwas das Gefühl für 3mm Filament aber ich denke es könnte schon ein wenig leichter gehen. Mal sehen wie sich das beim E3D anfühlt wenn ich es bekomme - das dauvon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
QuoteLe-Seaw Habe von einem Kunden dieses Hotend bekommen weil er immer Probleme damit hatte. Es ist ein wenig zickig, es sollte immer mit Lüfter betrieben werden, es langen schon 3s dann stopft es sofort innendrin und aufbohren ist angesagt um das Filament wieder zu entfernen. (selbst beim Aufheizen!!) Auch scheint es mir so das es höhere Temperaturen mag um überhaupt gescheit zu drucken. Allesvon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
QuoteSturmGhost Habe es mit einem Heißluftföhn geschafft. You only need to tighten the hotend with the included wrench key before use, it will never leak ! You don't need Teflon.von Reprapdiscount - Extruder, Hotends & verschiedene Materialien
I see there are modifications on ramps PCB? Why need all this modifications? Using a Taurino Power, will convert any Ramps to 12-24 v without modification of Ramps. Every Ramps can be used. Just plug and play and cost only 30 eur... (taurino power+ramps)von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteReaching Hi Leute Mi ist leider ein Missgeschick passiert. Irgendwie hat sich durch mangelnde Befestigung mein Merlin Hotend verselbstständigt und ist während des Drucks locker geworden und hat sich anscheinend dabei ein wenig gedreht. Nun ist da beim Druck die 0,2er Düse abgebrochen, leider unauffindbar verschollen. Das restliche Stückchen Gewinde steckte im Messingteil fest. Also habvon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
Quotebianchifan @reprapdiscount Elvira, some pics on the internet show a welding joint between different? material. The hot part looks like steal, the cooling part like Alu.. Correct, and it's a very good and precise soldering. We are not the best but we work hard to provide good quality Made In China! This soldering should be a pain in the a@#.. for copycatsvon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
QuoteXhnnas Leider hatte mein Temperatursensor einen defekt und die Heizpatrone hat mit voller Wucht mein JHead Hotend zum rauchen gebracht (ist komplett weggeschmolzen). Danke für die Links, ich habe mir mal das Hexagon Hotend bestellt und werde mal was dazu schreiben wenn er im Einsatz ist. Wird in einem Delta Drucker verwendet. Gruß Xhnnas. I am testing at the moment this protective rubbevon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
QuoteSturmGhost Kann mir jemand Erfahrungen zum Hexagon berichten? Preis gefällt mir sehr gut von dem... Here are some reviews, but just in english:von Reprapdiscount - Extruder, Hotends & verschiedene Materialien
Hello, the cardriges are not more available for sell, the spanish customer decided to keep the stock. Sorry for any inconvenince caused.von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteWilly In den $ erstickt? Im Vergleich zu "normalen" chinesischen Preisen ist das Zeug ja exorbitant teuer! LG, Willy I am not sure why you write this nonsense. Are you a racist? You are offering a 10 usd board (RADDS) for 70 eur and you say my HW is expensive? Strange world... In case you missed it, "RepRap" community is international, in case you don't like other people's offers, you mayvon Reprapdiscount - Offtopic
350 are sold already, 150 left...von Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
Hello, i have a customer ordered 20mm 40w heater cardriges and i sent him 15mm 30w and he reject it since he wants 40w. 500 pcs. price 1.8 usd each free shipping from spain. You don't need worry, the resistance is okay, and i offer 90 days warranty in case of any problem since i know the heater cardriges are very good quality. Best Regards, Elvira p.s. sorry for post in english languangevon Reprapdiscount - Kommerzielle Angebote & Produktvorstellungen
QuoteShadowRam I'm not quite sure why anyone would want to do business with a person that has no problem with putting people's personal information online, http://forum.reprapdiscount.com/forums/hall-of-shame-scammer.12/ We have the proof that we sent the goods and that the goods has been recived and signed by the "buyer" but the "buyer" has no proof of payment. How do yo call such behaviour invon Reprapdiscount - General
Quotekongorilla When I built my ORD Bot, the instructions on the wiki got me 90% of the way there: Any questions I had could be asked in the ORD Bot forum, and were quickly answered: Perhaps Reprapdiscount expected you to know about those resources? In any event, they should've included those links in the package. I've considered buying from them, but haven't yet. Did you have missing partsvon Reprapdiscount - General
You can find technical details for Bulldog Extrunders undervon Reprapdiscount - Extruder, Hotends & verschiedene Materialien
Comparing Bulldogs weight with other extrudersvon Reprapdiscount - For Sale
We do also provide custom orders like annodizing and laser engraving with your company logo and name. Min order qtty are 100 extruders, price can be discussed. Delivery time is usualy no more than 7 working days.von Reprapdiscount - For Sale
Reseller packs added in the Indiegogo campaign: 10x Bulldog Lite for 600 usd including FedEx shipping 10x Bulldog XL for 1000 usd including FedEx shippingvon Reprapdiscount - For Sale
Hotends used for test Tested with J-Head Tested with prusa v3 hotend Tested with Prusanozzle v1 and v2 Tested with Merlin hotend Tested with RRD Hexagon hotend Tested with E3D hotend Tested with Magma hotendvon Reprapdiscount - For Sale